Diehl Metering SCYLAR INT 8, Installation And User Manual

Page: 42 / 71

Seite 42 von
71
Installation in a pocket
The pockets are best installed in T-pieces with a 45 ° or 90 ° angle. The tip of the pocket must point in
the opposite direction to the direction of flow and must be located in the middle of the pipe (Fig. DD,
item 1-5). The temperature sensors must be sealed after installation in the pockets.
Fig. DD Installation in a pocket
6.2. Installing extension modules
CAUTION
Do not insert modules in the wrong slots.
Risk of damage to calculator!

Install modules in the correct slots.
NOTE
These modules have no effect on consumption recording and can be fitted
retrospectively without damaging the verification mark.
NOTE
Inserting a module into slot 2 immediately disables the internal radio function.