Diehl Metering SCYLAR INT 8, Installation And User Manual

Page: 5 / 71

Seite 5 von
71
1.1.6 Symbols
The symbols used in this Installation and User Guide are explained below.
Symbol Meaning
This symbol is the safety sign. All measures marked with the safety sign must be
observed. It is used on warning signs.
This symbol is a safety sign indicating that the ESD (electrostatic discharge)
regulations must be observed. It is used on warning signs. Touching the
electronic components or the connected cable to the meter may damage the
electronics.
This symbol draws attention to information.

This symbol indicates a requirement that must be fulfilled before taking action.
1. , 2. , … These numbers indicate the steps in a sequence of numbered actions.
・
This symbol shows the instructions for avoiding danger in a warning instruction or
an individual step.
1.2 Marking
1.2.1 CE marking
This product bears the CE marking, the metrology marking and the identification number of the notified
body. See Section 3.
1.2.2 EC declaration of conformity
The calculator complies with the directives and standards for MID-approved meters as stated in the
EC declaration of conformity. The EC declaration of conformity contains the number of the EC type
examination certificate. A copy of the EC declaration of conformity can be found at the end of this
document.
1.3 Copyright
© 2015 Diehl Metering GmbH
All rights reserved.
No part of this Installation and User Guide may be reproduced in any form whatsoever (printing,
photocopying or other process) or processed, reproduced or distributed by means of electronic
systems without our written consent. Claims for damages will be asserted in the event of
contravention.
Subject to change.