Diehl Metering SCYLAR INT 8, Installation And User Manual

Page: 4 / 71

Seite 4 von
71
1 General
1.1 About this Installation and User Guide
This Installation and User Guide refers exclusively to the SCYLAR INT 8 calculator and is part of the
product. It describes how to use this product safely for the intended purpose throughout the product
life cycle.
1.1.1 Target groups
Operators
The operator must ensure that personnel using the calculator read and observe the instructions given
in this guide and all necessary associated documents, particularly the safety instructions and warning
signs.
Trained personnel/users
Trained personnel must read, observe and follow the instructions given in this guide and the
necessary associated documents, particularly the safety instructions and warning signs.
1.1.2 Subject to change, validity
The information contained in this Installation and User Guide is valid at the time of release of this
version. The version number and release date of this Installation and User Guide are shown on the
back of the document. Changes to this guide are possible at any time.
1.1.3 Completeness
This Installation and User Guide is only complete in conjunction with the relevant associated
documents for the respective application.
1.1.4 Storage location
This Installation and User Guide and all relevant associated documents for the respective application
must be readily available and accessible at all times in the vicinity of the calculator or the overriding
system.
1.1.5 Warning signs
The warning levels indicated by the warning signs are explained below.
Signal word Level of danger Consequences of non-
compliance
DANGER Direct threat of danger Death or serious injury
WARNING Possible threat of danger Death or serious injury
CAUTION Possible dangerous situation Slight injuries