3
3
Configuring the CX Video
Gateway
Overview of configuring the CX Video Gateway
All software is pre-installed and pre-configured on the CX Video Gateway. However,
software parameters are set for the manufacturing environment. You must re-
configure some of these parameters so that the system operates properly at your
site.
Use the Vision™ Console to set up the gateway software. Using this tool, you enter
field values and the tool automatically modifies the configuration files for your model.
This section describes how to use the Vision™ Console to set up the gateway
software. It contains the following topics:
•
Gathering information
•
Logging into the gateway for the first time
•
Accessing the Vision™ Console
•
Creating or revising a configuration
•
Backing up a configuration
•
Restoring a configuration
•
Accessing the gateway using a secure shell
Note:
After you create the CX Video Gateway configuration, you can fine tune it if
necessary. For information, see
Overview of fine tuning the gateway configuration
on
page 111.
Dialogic
25
