Configuring the CX Video Gateway
Dialogic® Vision™ CX Video Gateway Administration Manual
Obtaining an IP address through DHCP
If you need to use DHCP for the gateway IP address, follow these steps:
Step
Action
1
Set up the DHCP server so the hostname and IP address assigned to the CX Video Gateway is
predetermined, for example, based on the gateway's MAC address.
2
Assign IP address 192.168.0.2 to the computer that will access the Vision™ Console.
3
Connect the Vision™ Console computer to eth0 on the CX Video Gateway either directly using a
crossover cable, or through a standalone Ethernet hub.
4
Enter the following URL from an Internet Explorer or Mozilla browser on the Vision console
computer:
http://192.168.0.1
You can also enter this URL from the CX Video Gateway after connecting a mouse, keyboard,
and monitor to the gateway.
5
Log into the Vision™ Console using the following information:
•
User: admin
•
Password: vision
The Overview page appears.
6
Click
Host IP information
in the Configuration menu.
The Host IP information page appears.
7
Select
Enable DHCP
in the DHCP setting field.
8
Click
Submit
.
9
Connect the CX Video Gateway to the network.
10
Once the CX Video Gateway has acquired its IP address and is reachable through a ping, access
the Vision™ Console.
11
Click
Services
on the Operations menu.
12
Click
Reboot
, and wait for the system to restart before continuing.
32
Dialogic
