Dialogic® Vision™ CX Video Gateway Administration Manual
Managing the CX Video Gateway
Managing CCXML applications
Use the Vision™ Console to specify the following properties for individual CCXML
applications, if the routing provided by the gateway call routing table does not
provide the required flexibility:
•
A number range that maps to the CCXML application. Calls within the
specified range are processed by the application.
•
Whether the application is a custom or gateway application.
•
The initial URI to use for an incoming call, based on the specified number
range.
•
The dialog server that processes the initial URI.
•
The outbound routes that the CCXML application uses for the PSTN calls that
it creates.
The Vision™ Console adds this information to the CCXML application definition file
(
ccxmlappcfg.xml
).
To specify properties for an application, you must first add the application to the
Vision™ Console. Adding CCXML applications to the Vision™ Console does not disable
gateway routing table functionality. The CX Video Gateway first tries to match calls
to custom CCXML applications. Calls that do not match a custom CCXML application
are then handled by the gateway routing table.
This topic describes how to:
•
Add a CCXML application definition to the Vision Console
•
Remove a CCXML application definition from the Vision Console
•
Modify a CCXML application definition
It also describes the pattern matching syntax used to match the dialed numbers of
inbound calls and to define outbound routes.
Adding a CCXML application definition to the Vision Console
To add a CCXML application to the Vision™ Console, follow these steps:
Step
Action
1
Access the Vision™ Console, as described in
Accessing the Vision Console
on page 33.
2
Click
CCXML applications
on the Provisioning menu.
The CCXML application configuration page appears. By default, there is one CCXML application
called
gateway.ccxml
defined for the CX Video Gateway. This application is defined as a
gateway application.
A gateway application accesses the gateway routing table for route definitions, while a custom
application defines routes based on the application definition. For more information about call
routing, see
Overview of creating routes
on page 63.
Note:
Do not remove or modify the default entry (for
gateway.ccxml
).
Dialogic
87
