Vision™ Console parameters
Dialogic® Vision™ CX Video Gateway Administration Manual
For more information, see
ISUP models
on page 16.
Options
The Options page contains global and advanced settings. Access this page by clicking
Options
on the Configuration menu.
Group
Parameter
Description
Global
Billing
If checked, billing is enabled.
Parameters in
drop-down list
Select a parameter to be configured from the drop-down list and click
Add
. The parameter is displayed in the window above and its value
can be edited. For more information on these parameters, see
Overview of fine tuning the gateway configuration
on page
Advanced
Telecom
111.
Port upgrade
The Port upgrade page lets you view the port capacity of the CX Video Gateway.
Access this page by clicking
Capacity
on the Configuration menu.
Parameter
Description
CX Video Gateway
Port capacity of the CX Video Gateway.
Video Transcoder
The Video Transcoder page lets you configure video transcoder resources for a video
transcoder system. Access this page by clicking
Video Transcoder
on the
Configuration menu.
Parameter
Description
Channels
Number of full-duplex video transcoder channels that are available for this system.
Usage warning
High water mark for CPU usage in percentage. If this threshold is reached, the
high water (%)
system issues an SNMP notification.
Usage warning
Low water mark for CPU usage in percentage. If this threshold is reached, the
low water (%)
system issues an SNMP notification to indicate that the CPU level has returned to
an acceptable level. This notification only occurs if the high water mark notification
was previously issued.
Usage reject
Upper limit of high water mark for CPU usage in percentage. If this threshold is
high water (%)
reached, the system issues an SNMP notification and begins to reject calls.
Usage reject low
Lower limit of low water mark for CPU usage in percentage. If this threshold is
water (%)
reached, the system issues an SNMP notification and begins to accept calls.
For more information about video transcoding, see
Managing video transcoder
resources
on page 94.
Import/Export configuration
The Import/Export configuration page lets you back up and restore a CX Video
Gateway configuration. Access this page by clicking
Import/Export
on the
Configuration menu. For more information, see
Backing up a configuration
on page
36 and
Restoring a configuration
on page 37.
52
Dialogic
