Fine tuning the CX Video Gateway configurationDialogic® Vision™ CX Video Gateway Administration Manual
Fine tuning gateway routing
By default, the CX Video Gateway uses the
gateway.ccxml
application to route calls.
This application uses the information found in the gateway routing table to route
incoming calls. If there is no route in the gateway routing table that matches the To
and From fields of an inbound call, the call is automatically rejected.
The
gateway.ccxml
application is defined in the CCXML Application Configuration
page on the Provisioning menu of the Vision™ Console. The Number Range field
shows .* which represents a wild card that matches all dialed numbers. The Initial
URI field shows
file:///opt/nms/vx/callserver/www/ccxml/gateway.ccxml
.
If you need routing functionality that goes beyond what
gateway.ccxml
provides, you
can do any combination of the following:
•
Modify the
gateway.ccxml
application definition.
•
Modify the
gateway.ccxml
application itself.
•
Create a custom CCXML application to provide routing capabilities.
Creating a new gateway application for routing
To create a new CCXML application that uses the gateway routing table, follow these
steps:
Step
Action
1
Copy the
gateway.ccxml
application to use as an application template.
2
Modify the logic of the new application, as needed.
Define the new application to the Vision™ Console, as described in
Managing CCXML applications
3
on page 87. When you define the new application, add it to the
Gateway
section of the CCXML
Application Configuration page.
Creating a custom application for routing
To create a custom CCXML application for routing, follow these steps:
Step
Action
1
Write the new application in CCXML, and include the desired routing functionality in the
application.
2
Add the application to the Vision™ Console as described in
Managing CCXML applications
on
page 87. When you define the new application, add it to the
Custom
section of the CCXML
Application Configuration page.
Example
The following example shows the application definition for a new gateway
application. In this example, calls whose dialed numbers match 333 use the
newgateway.ccxml
application for routing. All other calls use
gateway.ccxml
. Both
applications reference the gateway routing table.
Gateway applications:
Number Range Initial URI
333 file:///opt/nms/vx/callserver/www/ccxml/newgateway.ccxml
.* file:///opt/nms/vx/callserver/www/ccxml/gateway.ccxml
126
Dialogic
