background image

Page 7

Output Menu

2. Setup > Panels

The Panels screen displays all of the installed panels and the 

outputs. The following describes each column:

id

 - address, channel (r indicates a relay and d indicates a 

dimmer)

Label

 - descriptive name, which is assigned in this submenu 

group

Row

 - lists the row where it is located

Col

 - list s the column where it is located

This screen allows you to list new panels installed after initialization 

of the system, edit panel labels, and assign relay outputs to panels.

1. To add a new panel:

a)

  Scroll through the panel list to the unlabeled relays and 

select the relay. Select 

Add Panel

.

b)

  Enter the new 

panel name

 and select the 

OK

 button.

c)

  Enter the 

location

 for the panel and select the 

OK

 button.

2. To edit a panel:

a)

  Scroll through the list of panels and select the 

panel

 you are 

editing.

b)

  Select the panel link, enter the new 

panel name

, and select 

the 

OK

 button.

c)

  Select the location link, enter the 

location

 for the panel and 

select the 

OK

 button.

3. To assign a relay to a panel:

a)

  Scroll through the panel list to the panel you are assigning 

the relay to and select it. This can be a panel a relay is 

already assigned to or an unassigned panel.

b)

  Select the 

Change

 panel link (for an assigned panel) or the 

Specify panel

 link (for an unassigned panel).

c)

  Select the 

panel

 where the relay is to be assigned and select 

the 

Select

 button.

Outputs

6

Dialog® Lighting Control System

Outputs

Output Menu

1. 

To add a new panel:

a) Scroll through the panel list to the unlabeled relays

and select the 

relay

. Select 

Add Panel

.

b)

Enter the new 

panel name 

and select the 

OK

 button.

c) Enter the 

location

 for the panel and select the 

OK

button.

2. 

To edit a panel:

a)

Scroll through the list of panels and select the 

panel

you are editing.

b)

Select the panel link, enter the new 

panel name, 

and

select the 

OK

 button.

c)

Select the location link, enter the 

location

 for the

panel and select the 

OK

 button.

3.

 To assign a relay to a panel:

a)

Scroll through the panel list to the panel you are
assigning the relay to and select it. This can
be a panel a relay is already assigned to or an
unassigned panel.

b)

Select the 

Change panel 

link (for an assigned panel)

or the 

Specify panel 

link (for an unassigned panel).

c) 

Select the 

panel

 where the relay is to be assigned

and select the 

Select

 button.

2. Setup > Panels

The Panels screen displays all of the installed panels and the outputs. The 
following describes each column:

id 

- address, channel (r indicates a relay and d indicates a dimmer) 

Label

 - descriptive name, which is assigned in this submenu group

Row

 - lists the row where it is located

Col

 - list s the column where it is located

This screen allows you to list new panels installed after initialization of  the 
system, edit panel labels, and assign relay outputs to panels. 

6

Dialog® Lighting Control System

Outputs

Output Menu

1. 

To add a new panel:

a) Scroll through the panel list to the unlabeled relays

and select the 

relay

. Select 

Add Panel

.

b)

Enter the new 

panel name 

and select the 

OK

 button.

c) Enter the 

location

 for the panel and select the 

OK

button.

2. 

To edit a panel:

a)

Scroll through the list of panels and select the 

panel

you are editing.

b)

Select the panel link, enter the new 

panel name, 

and

select the 

OK

 button.

c)

Select the location link, enter the 

location

 for the

panel and select the 

OK

 button.

3.

 To assign a relay to a panel:

a)

Scroll through the panel list to the panel you are
assigning the relay to and select it. This can
be a panel a relay is already assigned to or an
unassigned panel.

b)

Select the 

Change panel 

link (for an assigned panel)

or the 

Specify panel 

link (for an unassigned panel).

c) 

Select the 

panel

 where the relay is to be assigned

and select the 

Select

 button.

2. Setup > Panels

The Panels screen displays all of the installed panels and the outputs. The 
following describes each column:

id 

- address, channel (r indicates a relay and d indicates a dimmer) 

Label

 - descriptive name, which is assigned in this submenu group

Row

 - lists the row where it is located

Col

 - list s the column where it is located

This screen allows you to list new panels installed after initialization of  the 
system, edit panel labels, and assign relay outputs to panels. 

6

Dialog® Lighting Control System

Outputs

Output Menu

1. 

To add a new panel:

a) Scroll through the panel list to the unlabeled relays

and select the 

relay

. Select 

Add Panel

.

b)

Enter the new 

panel name 

and select the 

OK

 button.

c) Enter the 

location

 for the panel and select the 

OK

button.

2. 

To edit a panel:

a)

Scroll through the list of panels and select the 

panel

you are editing.

b)

Select the panel link, enter the new 

panel name, 

and

select the 

OK

 button.

c)

Select the location link, enter the 

location

 for the

panel and select the 

OK

 button.

3.

 To assign a relay to a panel:

a)

Scroll through the panel list to the panel you are
assigning the relay to and select it. This can
be a panel a relay is already assigned to or an
unassigned panel.

b)

Select the 

Change panel 

link (for an assigned panel)

or the 

Specify panel 

link (for an unassigned panel).

c) 

Select the 

panel

 where the relay is to be assigned

and select the 

Select

 button.

2. Setup > Panels

The Panels screen displays all of the installed panels and the outputs. The 
following describes each column:

id 

- address, channel (r indicates a relay and d indicates a dimmer) 

Label

 - descriptive name, which is assigned in this submenu group

Row

 - lists the row where it is located

Col

 - list s the column where it is located

This screen allows you to list new panels installed after initialization of  the 
system, edit panel labels, and assign relay outputs to panels. 

6

Dialog® Lighting Control System

Outputs

Output Menu

1. 

To add a new panel:

a) Scroll through the panel list to the unlabeled relays

and select the 

relay

. Select 

Add Panel

.

b)

Enter the new 

panel name 

and select the 

OK

 button.

c) Enter the 

location

 for the panel and select the 

OK

button.

2. 

To edit a panel:

a)

Scroll through the list of panels and select the 

panel

you are editing.

b)

Select the panel link, enter the new 

panel name, 

and

select the 

OK

 button.

c)

Select the location link, enter the 

location

 for the

panel and select the 

OK

 button.

3.

 To assign a relay to a panel:

a)

Scroll through the panel list to the panel you are
assigning the relay to and select it. This can
be a panel a relay is already assigned to or an
unassigned panel.

b)

Select the 

Change panel 

link (for an assigned panel)

or the 

Specify panel 

link (for an unassigned panel).

c) 

Select the 

panel

 where the relay is to be assigned

and select the 

Select

 button.

2. Setup > Panels

The Panels screen displays all of the installed panels and the outputs. The 
following describes each column:

id 

- address, channel (r indicates a relay and d indicates a dimmer) 

Label

 - descriptive name, which is assigned in this submenu group

Row

 - lists the row where it is located

Col

 - list s the column where it is located

This screen allows you to list new panels installed after initialization of  the 
system, edit panel labels, and assign relay outputs to panels. 

6

Dialog® Lighting Control System

Outputs

Output Menu

1. 

To add a new panel:

a) Scroll through the panel list to the unlabeled relays

and select the 

relay

. Select 

Add Panel

.

b)

Enter the new 

panel name 

and select the 

OK

 button.

c) Enter the 

location

 for the panel and select the 

OK

button.

2. 

To edit a panel:

a)

Scroll through the list of panels and select the 

panel

you are editing.

b)

Select the panel link, enter the new 

panel name, 

and

select the 

OK

 button.

c)

Select the location link, enter the 

location

 for the

panel and select the 

OK

 button.

3.

 To assign a relay to a panel:

a)

Scroll through the panel list to the panel you are
assigning the relay to and select it. This can
be a panel a relay is already assigned to or an
unassigned panel.

b)

Select the 

Change panel 

link (for an assigned panel)

or the 

Specify panel 

link (for an unassigned panel).

c) 

Select the 

panel

 where the relay is to be assigned

and select the 

Select

 button.

2. Setup > Panels

The Panels screen displays all of the installed panels and the outputs. The 
following describes each column:

id 

- address, channel (r indicates a relay and d indicates a dimmer) 

Label

 - descriptive name, which is assigned in this submenu group

Row

 - lists the row where it is located

Col

 - list s the column where it is located

This screen allows you to list new panels installed after initialization of  the 
system, edit panel labels, and assign relay outputs to panels. 

6

Dialog® Lighting Control System

Outputs

Output Menu

1. 

To add a new panel:

a) Scroll through the panel list to the unlabeled relays

and select the 

relay

. Select 

Add Panel

.

b)

Enter the new 

panel name 

and select the 

OK

 button.

c) Enter the 

location

 for the panel and select the 

OK

button.

2. 

To edit a panel:

a)

Scroll through the list of panels and select the 

panel

you are editing.

b)

Select the panel link, enter the new 

panel name, 

and

select the 

OK

 button.

c)

Select the location link, enter the 

location

 for the

panel and select the 

OK

 button.

3.

 To assign a relay to a panel:

a)

Scroll through the panel list to the panel you are
assigning the relay to and select it. This can
be a panel a relay is already assigned to or an
unassigned panel.

b)

Select the 

Change panel 

link (for an assigned panel)

or the 

Specify panel 

link (for an unassigned panel).

c) 

Select the 

panel

 where the relay is to be assigned

and select the 

Select

 button.

2. Setup > Panels

The Panels screen displays all of the installed panels and the outputs. The 
following describes each column:

id 

- address, channel (r indicates a relay and d indicates a dimmer) 

Label

 - descriptive name, which is assigned in this submenu group

Row

 - lists the row where it is located

Col

 - list s the column where it is located

This screen allows you to list new panels installed after initialization of  the 
system, edit panel labels, and assign relay outputs to panels. 

6

Dialog® Lighting Control System

Outputs

Output Menu

1. 

To add a new panel:

a) Scroll through the panel list to the unlabeled relays

and select the 

relay

. Select 

Add Panel

.

b)

Enter the new 

panel name 

and select the 

OK

 button.

c) Enter the 

location

 for the panel and select the 

OK

button.

2. 

To edit a panel:

a)

Scroll through the list of panels and select the 

panel

you are editing.

b)

Select the panel link, enter the new 

panel name, 

and

select the 

OK

 button.

c)

Select the location link, enter the 

location

 for the

panel and select the 

OK

 button.

3.

 To assign a relay to a panel:

a)

Scroll through the panel list to the panel you are
assigning the relay to and select it. This can
be a panel a relay is already assigned to or an
unassigned panel.

b)

Select the 

Change panel 

link (for an assigned panel)

or the 

Specify panel 

link (for an unassigned panel).

c) 

Select the 

panel

 where the relay is to be assigned

and select the 

Select

 button.

2. Setup > Panels

The Panels screen displays all of the installed panels and the outputs. The 
following describes each column:

id 

- address, channel (r indicates a relay and d indicates a dimmer) 

Label

 - descriptive name, which is assigned in this submenu group

Row

 - lists the row where it is located

Col

 - list s the column where it is located

This screen allows you to list new panels installed after initialization of  the 
system, edit panel labels, and assign relay outputs to panels. 

1. To add a new panel:

2. To edit a panel:

3. To assign a relay to a panel:

a)

a)

a)

a)

b)

a)

b)

c)

b)

Summary of Contents for WLC-4150-C












































Reviews: