Dialog WLC-4150-C, Field Manual

Page: 18 / 43

Page 18
Modes Menu
4. Perm Block
The Perm Block screen displays all Perm Block modes. Once a Perm
Block is activated, this disables all associated outputs, groups, and
presets. The functionality can only be enabled again when the Perm
Block is deactivated.
To create a new Flick Mode:
a) Select the Add Mode link.
b) Select the target output type and select the OK button.
c) Select the target elements by selecting the Select button.
The Perm Block screen has three tabs:
1. Label
You can modify a mode name by:
a) Select a mode and select its label.
b) Enter the new mode name and select the OK button.
2. Control
You can activate, deactivate, or modify a mode by:
a) Activate or deactivate a mode by selecting the ACTIVATE or
DEACTIVATE button.
An orange rectangle is displayed for activated modes and a
blue rectangle for deactivated modes.
3. LOGs
You can view the historical activity for a selected mode by
selecting the LOGs tab.
Modes
17
Dialog® Lighting Control System
Modes Menu
To create a new Flick Mode:
a)
Select the Add Mode link.
b)
Select the target output type and select the OK button.
c)
Select the target elements by selecting the Select button.
The Perm Block screen has three tabs:
1. Label
You can modify a mode name by:
a)
Select a mode and select its label.
b)
Enter the new mode name and select the OK button.
2. Control
You can activate, deactivate, or modify a mode by:
a)
Activate or deactivate a mode by selecting the
ACTIVATE
or
DEACTIVATE
button.
An orange rectangle is displayed for activated modes and a blue rectangle
for deactivated modes.
3. LOGs
You can view the historical activity for a selected mode by selecting the
LOGs
tab.
4. Perm Block
The Perm Block screen displays all Perm Block modes. Once a Perm Block is
activated, this disables all associated outputs, groups, and presets. The functionality
can only be enabled again when the Perm Block is deactivated.
Modes
C
M
Y
CM
MY
CY
CMY
K
2. Control:
To create a new Flick Mode:
a)
17
Dialog® Lighting Control System
Modes Menu
To create a new Flick Mode:
a)
Select the Add Mode link.
b)
Select the target output type and select the OK button.
c)
Select the target elements by selecting the Select button.
The Perm Block screen has three tabs:
1. Label
You can modify a mode name by:
a)
Select a mode and select its label.
b)
Enter the new mode name and select the OK button.
2. Control
You can activate, deactivate, or modify a mode by:
a)
Activate or deactivate a mode by selecting the
ACTIVATE
or
DEACTIVATE
button.
An orange rectangle is displayed for activated modes and a blue rectangle
for deactivated modes.
3. LOGs
You can view the historical activity for a selected mode by selecting the
LOGs
tab.
4. Perm Block
The Perm Block screen displays all Perm Block modes. Once a Perm Block is
activated, this disables all associated outputs, groups, and presets. The functionality
can only be enabled again when the Perm Block is deactivated.
Modes
C
M
Y
CM
MY
CY
CMY
K
a)