Dialog WLC-4150-C Field Manual Download Page 14

Page: 14 / 43

Page 14

Dialog® Lighting Control System

Presets

Setup (continued)

(continued) If a selected preset is a relay, you specify if it

is turned on or turned off when the preset is activated. If

a selected output is a dimmer, adjust the dimmer levels to

percentage of brightness by using the slider.

To set the parameters for the preset of the controlling

group, select the

Settings

button. Select the setting you

are changing and enter the new values.

The settings include the following:

1. Group Associated

- displays the groups associated

with the activated preset.

2. Mode Trigger

- operates the preset as a trigger for

pre-programmed mode. You can select specific input

and output modes, as well as control other lighting

control functions.

3. Fade Type

- sets the dimming method for the dimmers

activated by the preset. This can be controlled by a

specified time in number of seconds or by a rate of

dimming change per second to go to the next

dimming level value. To set this value, select the

Time

Rate

option, select the

button, and specify the

number of seconds (time) or percentage of brightness

(rate) by using the slider.

4. Switch

- select the manufacturer of the switch inputs

and outputs associated with the preset. The default

value is Douglas.

5. Contact Input

- select the

manufacturer

and

type

of the contact input, which will trigger the preset. The

default value for the manufacturer is Douglas and the

default value for the type is Momentary Toggle. Also,

set the

delay OFF time

by using the slider and

selecting

Set

. The default value is 30 seconds.

6. Occupancy Sensor

- select the manufacturer of the

occupancy sensor input. The default value is Douglas.

Also, set the sensitivity of the occupancy sensor input

and delay OFF time by selecting

Douglas

as the OCC

Manufacturer and using the slider and selecting

Set

. The default values are 10 seconds 30 seconds,

respectively.

CMY

Dialog® Lighting Control System

Presets

Setup (continued)

(continued) If a selected preset is a relay, you specify if it

is turned on or turned off when the preset is activated. If

a selected output is a dimmer, adjust the dimmer levels to

percentage of brightness by using the slider.

To set the parameters for the preset of the controlling

group, select the

Settings

button. Select the setting you

are changing and enter the new values.

The settings include the following:

1. Group Associated

- displays the groups associated

with the activated preset.

2. Mode Trigger

- operates the preset as a trigger for

pre-programmed mode. You can select specific input

and output modes, as well as control other lighting

control functions.

3. Fade Type

- sets the dimming method for the dimmers

activated by the preset. This can be controlled by a

specified time in number of seconds or by a rate of

dimming change per second to go to the next

dimming level value. To set this value, select the

Time

Rate

option, select the

button, and specify the

number of seconds (time) or percentage of brightness

(rate) by using the slider.

4. Switch

- select the manufacturer of the switch inputs

and outputs associated with the preset. The default

value is Douglas.

5. Contact Input

- select the

manufacturer

and

type

of the contact input, which will trigger the preset. The

default value for the manufacturer is Douglas and the

default value for the type is Momentary Toggle. Also,

set the

delay OFF time

by using the slider and

selecting

Set

. The default value is 30 seconds.

6. Occupancy Sensor

- select the manufacturer of the

occupancy sensor input. The default value is Douglas.

Also, set the sensitivity of the occupancy sensor input

and delay OFF time by selecting

Douglas

as the OCC

Manufacturer and using the slider and selecting

Set

. The default values are 10 seconds 30 seconds,

respectively.

CMY

Dialog® Lighting Control System

Presets

Setup (continued)

(continued) If a selected preset is a relay, you specify if it

is turned on or turned off when the preset is activated. If

a selected output is a dimmer, adjust the dimmer levels to

percentage of brightness by using the slider.

To set the parameters for the preset of the controlling

group, select the

Settings

button. Select the setting you

are changing and enter the new values.

The settings include the following:

1. Group Associated

- displays the groups associated

with the activated preset.

2. Mode Trigger

- operates the preset as a trigger for

pre-programmed mode. You can select specific input

and output modes, as well as control other lighting

control functions.

3. Fade Type

- sets the dimming method for the dimmers

activated by the preset. This can be controlled by a

specified time in number of seconds or by a rate of

dimming change per second to go to the next

dimming level value. To set this value, select the

Time

Rate

option, select the

button, and specify the

number of seconds (time) or percentage of brightness

(rate) by using the slider.

4. Switch

- select the manufacturer of the switch inputs

and outputs associated with the preset. The default

value is Douglas.

5. Contact Input

- select the

manufacturer

and

type

of the contact input, which will trigger the preset. The

default value for the manufacturer is Douglas and the

default value for the type is Momentary Toggle. Also,

set the

delay OFF time

by using the slider and

selecting

Set

. The default value is 30 seconds.

6. Occupancy Sensor

- select the manufacturer of the

occupancy sensor input. The default value is Douglas.

Also, set the sensitivity of the occupancy sensor input

and delay OFF time by selecting

Douglas

as the OCC

Manufacturer and using the slider and selecting

Set

. The default values are 10 seconds 30 seconds,

respectively.

CMY

Dialog® Lighting Control System

Presets

Setup (continued)

(continued) If a selected preset is a relay, you specify if it

is turned on or turned off when the preset is activated. If

a selected output is a dimmer, adjust the dimmer levels to

percentage of brightness by using the slider.

To set the parameters for the preset of the controlling

group, select the

Settings

button. Select the setting you

are changing and enter the new values.

The settings include the following:

1. Group Associated

- displays the groups associated

with the activated preset.

2. Mode Trigger

- operates the preset as a trigger for

pre-programmed mode. You can select specific input

and output modes, as well as control other lighting

control functions.

3. Fade Type

- sets the dimming method for the dimmers

activated by the preset. This can be controlled by a

specified time in number of seconds or by a rate of

dimming change per second to go to the next

dimming level value. To set this value, select the

Time

Rate

option, select the

button, and specify the

number of seconds (time) or percentage of brightness

(rate) by using the slider.

4. Switch

- select the manufacturer of the switch inputs

and outputs associated with the preset. The default

value is Douglas.

5. Contact Input

- select the

manufacturer

and

type

of the contact input, which will trigger the preset. The

default value for the manufacturer is Douglas and the

default value for the type is Momentary Toggle. Also,

set the

delay OFF time

by using the slider and

selecting

Set

. The default value is 30 seconds.

6. Occupancy Sensor

- select the manufacturer of the

occupancy sensor input. The default value is Douglas.

Also, set the sensitivity of the occupancy sensor input

and delay OFF time by selecting

Douglas

as the OCC

Manufacturer and using the slider and selecting

Set

. The default values are 10 seconds 30 seconds,

respectively.

CMY

Dialog® Lighting Control System

Presets

Setup (continued)

(continued) If a selected preset is a relay, you specify if it

is turned on or turned off when the preset is activated. If

a selected output is a dimmer, adjust the dimmer levels to

percentage of brightness by using the slider.

To set the parameters for the preset of the controlling

group, select the

Settings

button. Select the setting you

are changing and enter the new values.

The settings include the following:

1. Group Associated

- displays the groups associated

with the activated preset.

2. Mode Trigger

- operates the preset as a trigger for

pre-programmed mode. You can select specific input

and output modes, as well as control other lighting

control functions.

3. Fade Type

- sets the dimming method for the dimmers

activated by the preset. This can be controlled by a

specified time in number of seconds or by a rate of

dimming change per second to go to the next

dimming level value. To set this value, select the

Time

Rate

option, select the

button, and specify the

number of seconds (time) or percentage of brightness

(rate) by using the slider.

4. Switch

- select the manufacturer of the switch inputs

and outputs associated with the preset. The default

value is Douglas.

5. Contact Input

- select the

manufacturer

and

type

of the contact input, which will trigger the preset. The

default value for the manufacturer is Douglas and the

default value for the type is Momentary Toggle. Also,

set the

delay OFF time

by using the slider and

selecting

Set

. The default value is 30 seconds.

6. Occupancy Sensor

- select the manufacturer of the

occupancy sensor input. The default value is Douglas.

Also, set the sensitivity of the occupancy sensor input

and delay OFF time by selecting

Douglas

as the OCC

Manufacturer and using the slider and selecting

Set

. The default values are 10 seconds 30 seconds,

respectively.

CMY

4. Setup (continued)

(continued) If a selected preset is a relay, you specify if it

is turned on or turned off when the preset is activated. If

a selected output is a dimmer, adjust the dimmer levels to

percentage of brightness by using the slider.

To set the parameters for the preset of the controlling

group, select the

Settings

button. Select the setting you are

changing and enter the new values.

The settings include the following:

1. Group Associated

- displays the groups associated with the

activated preset.

2. Mode Trigger

- operates the preset as a trigger for pre-

programmed mode. You can select specific input and output

modes, as well as control other lighting control functions.

3. Fade Type

- sets the dimming method for the dimmers

activated by the preset. This can be controlled by a specified

time in number of seconds or by a rate of dimming change

per second to go to the next dimming level value. To set this

value, select the

Time

Rate

option, select the

button,

and specify the number of seconds (time) or percentage of

brightness (rate) by using the slider.

4. Switch

- select the manufacturer of the switch inputs and

outputs associated with the preset. The default value is

Douglas.

5. Contact Input

- select the

manufacturer

and

type

of the

contact input, which will trigger the preset. The default value

for the manufacturer is Douglas and the default value for the

type is Momentary Toggle. Also, set the

delay OFF time

using the slider and selecting

Set

. The default value is 30

seconds.

6. Occupancy Sensor

- select the manufacturer of the

occupancy sensor input. The default value is Douglas. Also,

set the sensitivity of the occupancy sensor input and delay

OFF time by selecting

Douglas

as the OCC Manufacturer

and using the slider and selecting

Set

. The default values

are 10 seconds 30 seconds, respectively.

Presets

Dialog® Lighting Control System

Presets

Setup (continued)

(continued) If a selected preset is a relay, you specify if it

is turned on or turned off when the preset is activated. If

a selected output is a dimmer, adjust the dimmer levels to

percentage of brightness by using the slider.

To set the parameters for the preset of the controlling

group, select the

Settings

button. Select the setting you

are changing and enter the new values.

The settings include the following:

1. Group Associated

- displays the groups associated

with the activated preset.

2. Mode Trigger

- operates the preset as a trigger for

pre-programmed mode. You can select specific input

and output modes, as well as control other lighting

control functions.

3. Fade Type

- sets the dimming method for the dimmers

activated by the preset. This can be controlled by a

specified time in number of seconds or by a rate of

dimming change per second to go to the next

dimming level value. To set this value, select the

Time

Rate

option, select the

button, and specify the

number of seconds (time) or percentage of brightness

(rate) by using the slider.

4. Switch

- select the manufacturer of the switch inputs

and outputs associated with the preset. The default

value is Douglas.

5. Contact Input

- select the

manufacturer

and

type

of the contact input, which will trigger the preset. The

default value for the manufacturer is Douglas and the

default value for the type is Momentary Toggle. Also,

set the

delay OFF time

by using the slider and

selecting

Set

. The default value is 30 seconds.

6. Occupancy Sensor

- select the manufacturer of the

occupancy sensor input. The default value is Douglas.

Also, set the sensitivity of the occupancy sensor input

and delay OFF time by selecting

Douglas

as the OCC

Manufacturer and using the slider and selecting

Set

. The default values are 10 seconds 30 seconds,

respectively.

CMY

Dialog® Lighting Control System

Presets

Setup (continued)

(continued) If a selected preset is a relay, you specify if it

is turned on or turned off when the preset is activated. If

a selected output is a dimmer, adjust the dimmer levels to

percentage of brightness by using the slider.

To set the parameters for the preset of the controlling

group, select the

Settings

button. Select the setting you

are changing and enter the new values.

The settings include the following:

1. Group Associated

- displays the groups associated

with the activated preset.

2. Mode Trigger

- operates the preset as a trigger for

pre-programmed mode. You can select specific input

and output modes, as well as control other lighting

control functions.

3. Fade Type

- sets the dimming method for the dimmers

activated by the preset. This can be controlled by a

specified time in number of seconds or by a rate of

dimming change per second to go to the next

dimming level value. To set this value, select the

Time

Rate

option, select the

button, and specify the

number of seconds (time) or percentage of brightness

(rate) by using the slider.

4. Switch

- select the manufacturer of the switch inputs

and outputs associated with the preset. The default

value is Douglas.

5. Contact Input

- select the

manufacturer

and

type

of the contact input, which will trigger the preset. The

default value for the manufacturer is Douglas and the

default value for the type is Momentary Toggle. Also,

set the

delay OFF time

by using the slider and

selecting

Set

. The default value is 30 seconds.

6. Occupancy Sensor

- select the manufacturer of the

occupancy sensor input. The default value is Douglas.

Also, set the sensitivity of the occupancy sensor input

and delay OFF time by selecting

Douglas

as the OCC

Manufacturer and using the slider and selecting

Set

. The default values are 10 seconds 30 seconds,

respectively.

CMY

To create a global preset:

Settings

Dialog® Lighting Control System

Presets

Setup (continued)

(continued) If a selected preset is a relay, you specify if it

is turned on or turned off when the preset is activated. If

a selected output is a dimmer, adjust the dimmer levels to

percentage of brightness by using the slider.

To set the parameters for the preset of the controlling

group, select the

Settings

button. Select the setting you

are changing and enter the new values.

The settings include the following:

1. Group Associated

- displays the groups associated

with the activated preset.

2. Mode Trigger

- operates the preset as a trigger for

pre-programmed mode. You can select specific input

and output modes, as well as control other lighting

control functions.

3. Fade Type

- sets the dimming method for the dimmers

activated by the preset. This can be controlled by a

specified time in number of seconds or by a rate of

dimming change per second to go to the next

dimming level value. To set this value, select the

Time

Rate

option, select the

button, and specify the

number of seconds (time) or percentage of brightness

(rate) by using the slider.

4. Switch

- select the manufacturer of the switch inputs

and outputs associated with the preset. The default

value is Douglas.

5. Contact Input

- select the

manufacturer

and

type

of the contact input, which will trigger the preset. The

default value for the manufacturer is Douglas and the

default value for the type is Momentary Toggle. Also,

set the

delay OFF time

by using the slider and

selecting

Set

. The default value is 30 seconds.

6. Occupancy Sensor

- select the manufacturer of the

occupancy sensor input. The default value is Douglas.

Also, set the sensitivity of the occupancy sensor input

and delay OFF time by selecting

Douglas

as the OCC

Manufacturer and using the slider and selecting

Set

. The default values are 10 seconds 30 seconds,

respectively.

CMY

Summary of Contents for WLC-4150-C












































Search results

Summary of Contents for WLC-4150-C

Reviews:

Related manuals for WLC-4150-C

Brands by name

Popular brands

Dialog WLC-4150-C, Field Manual

Search results

Summary of Contents for WLC-4150-C

Reviews:

Related manuals for WLC-4150-C

Brands by name

Popular brands