Dexter Laundry Wn0600ea-13en2x-sskcs-usx, Parts & Service Manual

Page: 57 / 159

Adjusting the Loading Door
The door can be adjusted by changing the number of shims behind the door hinge and the door lock
assembly. The vertical fit of the door to the tub can be altered by loosening the door hinge bolts and
raising or lowering the door before retightening. It is important for the door to be centered on the tub
front. By chalking the front of the tub and closing the door to transfer that line to the gasket, the centering
can be evaluated. It is also important for door pressure to be similar around the door perimeter. Door
pressure can be evaluated by inserting a dollar bill in several positions and tugging on it. See Parts Section
for kit to increase door sealing pressure.
Loading Door Removal
Step 1: Support door to prevent dropping.
Step 2: Remove 2 or 3 bolts
holding hinge retainer
clamp or lower leaf to the
door ring. Lift up door off
and set aside.
Loading Door Hinge Removal
Step 1: First remove loading door, front
panel and masking ring if used.
Step 2: Remove 3 screws holding door hinge.
Shims may be present between hinge
and tub front. The number may be
increased or decreased to adjust right
side door pressure.
Note: Door hinge mounting bolts
penetrate tub front and require silicone
sealer applied to holes when reinstalling.
Part # 8533-097-001 11/16
57