DS-CAL
SOFTWARE USER MANUAL
Illustration 8: DS-CAL test board back connectors
Warning
During the calibration procedure voltage up to 1000 V can appear on the output of the used
multifunction calibrator! Use only the 4 mm safety test leads with touch protection and follow
strictly the safety instructions provided by the manual!
5.3. DS-CAL test board
The following connections should be done to the DS-CAL test board as described by the Table 7.
Illustration 8 shows DS-CAL test board connectors as a reference.
Depending on different DEWESoft UUT connections, see chapters Sirius USB, DEWE43, Krypton and DSI
adapters.
DS-CAL V20-1
16/67
