DS-CAL
SOFTWARE USER MANUAL
●
When due date of one or more external devices approaches, you will be warned before starting
calibration procedure. Here you can set how many days before the expiration date a warning will
be issued.
DEWESoft section:
●
Here the right path is already chosen, so do not make any changes unless you have manually
changed the folder structure.
●
DEWESoft is normally running in the background during calibration, which you can change if
you check the “Visible” option.
Calibration board section:
●
Select DS-CAL 1 (v1) if you have a DS-CAL test board without PPS connector (see chapters
DS-CAL1 v1 test board)
●
In this case serial number of the DS-CAL test board has to be entered manually.
●
Select DS-CAL 1 (v3) if you have a DS-CAL test board with PPS connector (see chapters DS-CAL1
v3 test board)
●
Select DS-CAL 2 if you have a DS-CAL test board with USB connector (see chapters DS-CAL2 test
board)
●
Enable the “Frequency test” checkbox only if a precise PPS signal from an external time source is
connected to the PPS connector on the DS-CAL test board.
7.4.Database
●
Select here the path where the calibration data (XML files) will be stored.
●
By checking “Generate PDF Reports” PDF calibration certificates will be automatically generated
at the end of the calibration procedure.
Illustration 14: Tolerance tab of the DSCalibrator
DS-CAL V20-1
23/67
