DS-CAL
SOFTWARE USER MANUAL
10.4. Power supply connector
Type of installed conector is Lemo EGJ.1B.302.CLA (male).
For the DS-CAL test board an unregulated power supply of 9 to 32 V DC is required.
Pin
Name
Description
1
+
Power
2
-
Power supply -
Table 23: Power connector pinout
10.5. GND connector
For a correct adjustment and calibration check the ground (GND) of the UUT must be connected to the
DS-CAL test board with the supplied banana plug cable.
DS-CAL V20-1
58/67
