DS-CAL
SOFTWARE USER MANUAL
PPS signal must be connected only it is required to check also the accuracy of the internal oscilator on
the UUT. Additionally the “Frequency test” checkbox has to be enabled in the settings of DSCalibrator
software (see chapters External devices).
If used with the Dewesoft UUT without the CAN port, see chapters Dewesoft UUT without CAN port.
5.3.3. DS-CAL2 test board
DS-CAL2 test board features also the PPS and USB connector.
USB is used for control by the DSCalibrator instead of CAN port.
It still can be used via CAN port if defined as DS-CAL1 v3 test board in settings of DSCalibrator software
(see 7.3 External devices, page 33).
DS-CAL V20-1
18/67
