55
english
ensure that the safety of the power tool is
maintained.
b)
Never service damaged battery packs.
Service of battery packs should only be
performed by the manufacturer or authorised
service providers.
ADDITIONAL SPECIFIC SAFETY RULES
FOR CIRCULAR SAWS
Safety Instructions for All Saws
a)
DANGER:
Keep hands away from cutting
area and the blade. Keep your second hand
on auxiliary handle, or motor housing.
If both
hands are holding the saw, they cannot be cut
by the blade.
b)
Do not reach underneath the workpiece.
The
guard cannot protect you from the blade below
the workpiece.
c)
Adjust the cutting depth to the thickness
of the workpiece.
Less than a full tooth of
the blade teeth should be visible below the
workpiece.
d)
Never hold piece being cut in your hands
or across your leg while cutting. Secure the
workpiece to a stable platform.
It is important
to support the work properly to minimize body
exposure, blade binding, or loss of control.
e)
Hold the power tool by insulated gripping
surfaces when performing an operation
where the cutting tool may contact hidden
wiring.
Contact with a “live” wire will also make
exposed metal parts of the power tool “live” and
could give the operator an electric shock.
f)
When ripping always use a rip fence or
straight edge guide.
This improves the
accuracy of cut and reduces the chance of
blade binding.
g)
Always use blades with correct size and
shape (diamond versus round) of arbour
holes.
Blades that do not match the mounting
hardware of the saw will run off-centre, causing
loss of control.
h)
Never use damaged or incorrect blade
washers or bolt.
The blade washers and
bolt were specially designed for your saw, for
optimum performance and safety of operation.
Causes and Operator Prevention
of Kickback
– Kickback is a sudden reaction to a pinched,
jammed or misaligned saw blade, causing
an uncontrolled saw to lift up and out of the
workpiece toward the operator;
g)
Use the power tool, accessories and
tool bits etc., in accordance with these
instructions taking into account the
working conditions and the work to
be performed.
Use of the power tool for
operations different from those intended
could result in a hazardous situation.
h)
Keep handles and grasping surfaces
dry, clean and free from oil and grease.
Slippery handles and grasping surfaces do
not allow for safe handling and control of the
tool in unexpected situations.
5) BATTERY TOOL USE AND CARE
a)
Recharge only with the charger
specified by the manufacturer.
A charger
that is suitable for one type of battery pack
may create a risk of fire when used with
another battery pack.
b)
Use power tools only with specifically
designated battery packs.
Use of any
other battery packs may create a risk of
injury and fire.
c)
When battery pack is not in use, keep it
away from other metal objects like paper
clips, coins, keys, nails, screws or other
small metal objects that can make a
connection from one terminal to another.
Shorting the battery terminals together may
cause burns or a fire.
d)
Under abusive conditions, liquid may
be ejected from the battery; avoid
contact. If contact accidentally occurs,
flush with water. If liquid contacts eyes,
additionally seek medical help.
Liquid
ejected from the battery may cause irritation
or burns.
e)
Do not use a battery pack or tool that
is damaged or modified.
Damaged or
modified batteries may exhibit unpredicatable
behaviour resulting in fire, explosion or risk of
injury.
f)
Do not expose battery pack or tool to
fire or excessive temperature.
Exposure
to fire or temperature above 130
˚C may
cause explosion.
g)
Follow all charging instructions and
do not charge the battery pack or tool
outside the temperature range specified
in the instructions.
Charging improperly or
at temperatures outside the specified range
may damage the battery and increase the
risk of fire.
6) SERVICE
a)
Have your power tool serviced by
a qualified repair person using only
identical replacement parts.
This will
Summary of Contents for DCS575
