THIS EQUIPMENT IS NOT DESIGNED FOR MAKING
EMERGENCY TELEPHONE CALLS WHEN THE POWER
FAILS. ALTERNATIVE ARRANGEMENTS SHOULD BE
MADE FOR ACCESS TO DIAL EMERGENCY SERVICES.
Before operating this set,
please read these instructions carefully.
TECHNICAL DETAILS
Binatone Helpline (for UK only)
Monday to Friday from 9:00am to 5:00pm
Tel: 0845 345 9677
**Please note that all calls are charged at local rate
Or visit our website:
www.binatoneonline.com
USER GUIDE
Digital Cordless Telephone
Elite 2025
with Answer Machine
Standard
Frequency range
Channel bandwidth
Operating range
Operating time
Temperature range
Digital Enhanced Cordless
Telecommunication (DECT)
1.88 to 1.9 GHz
1.728 MHz
Up to 300m outdoors;
Standby: 100 hours,Talking:
10 hours
Battery charge time:15 hours
Operating 0 C to 40 C, Storage -20 C to 60 C
(bandwidth = 20 MHz)
Up to 50m indoors
CLEANING AND CARE
Do not clean
any part of your phone system with benzene, thinners
or other solvent chemicals as this may cause permanent damage which is not
covered by the Guarantee.
When necessary, clean it with a damp cloth.
Keep your
hot, humid conditions
or
strong sunlight,
and
don't let it get wet.
Every effort has been made to ensure high standards of reliability for your
However, if something does go wrong, please
repair it yourself, but
consult your supplier or the Helpline.
do
not try to
phone system away from
phone system.
1
2
TABLE OF CONTENTS
1 IMPORTANT SAFETY INSTRUCTIONS...........................................................
2 INSTALLING YOUR PHONE ............................................................................ 5
2.1 C
ONNECTING THE BASE STATION .......................................................................... 5
2.2 I
NSTALLING AND CHARGING THE BATTERIES...................................................... 5
3 GETTING TO KNOW YOUR PHONE................................................................ 6
3.1 H
ANDSET OVERVIEW ................................................................................................ 6
3.2 B
ASE STATION OVERVIEW .....................................................................................
3.3 D
ISPLAY ICONS AND SYMBOLS............................................................................... 7
3.
M
ENU STRUCTURE ....................................................................................................
3.
T
EXT AND DIGIT ENTRY TABLE................................................................................ 9
4 USING YOUR PHONE .....................................................................................
4.1 M
AKE A CALL............................................................................................................
4.2 A
NSWER A CALL .....................................................................................................
4.3 E
ND A CALL ..............................................................................................................
4.4
4.6 M
UTE A CALL ............................................................................................................
4.7
12
4.8 T
URN ON THE KEYPAD LOCK ................................................................................
4.9 R
EDIAL THE LAST NUMBER ...................................................................................
4.10 F
IND THE HANDSET .................................................................................................
4.1
AKE AN INTERNAL CALL(FOR MULTI-HANDSET VERSIONS ONLY ) ...............
5 PRIVATE PHONEBOOK..................................................................................
5.3 V
IEW A PHONEBOOK ENTRY .................................................................................
5.1 ADD A NEW PHONEBOOK ENTRY..........................................................................
5.2 SEARCH A PHONEBOOK ENTRY.............................................................................
4
5
8
11
11
11
TURN OFF HANDSET RINGER
3
11
12
12
................................................................................
12
12
13
13
15
15
15
15
5.4 E
DIT A PHONEBOOK ENTRY ...................................................................................
5.5 D
ELETE A PHONEBOOK ENTRY .............................................................................
5.6 D
ELETE
5.7 C
HECK THE PHONEBOOK USAGE .........................................................................
6 CALLER DISPLAY (NETWORK DEPENDENT)..............................................
6.1 V
IEW THE CALL LIST................................................................................................
6.2 S
TORE A CALL LIST NUMBER INTO THE PHONEBOOK.......................................
6.3 D
ELETE AN ENTRY IN THE CALL LIST ...................................................................
6.4 D
ELETE
7 PHONE SETTINGS .........................................................................................
7.1 DATE AND TIME SETTINGS .....................................................................................
7.2 A
LARM SETTINGS.....................................................................................................
7.3 HANDSET SETTINGS ................................................................................................
7.4 B
ASE SETTINGS .......................................................................................................22
TROUBLESHOOTING .............................................................................................
DECLARATION OF CONFORMITY
........................................................................
7.5 REGISTRATION .........................................................................................................24
7.6 R
ESET YOUR PHONE ...............................................................................................
9
ALL PHONEBOOK ENTRIES
17
ALL CALL LIST ENTRIES
11
GUARANTEE AND SERVICE
..................................................................................24
8 ANSWERING MACHINE
10
32
33
34
................................................................................
REMOTE CARD ...............
...........................................................................................
R
EMOTE CARD
29
16
17
17
17
.....................................................................
17
19
18
18
18
.........................................................................
19
19
20
21
24
................................................................................
6
..........................................................25
8.1 TURN THE ANSWERING MACHINE ON/OFF
...........................................................................................
8.2 LISTEN TO MESSAGES
................................................................................................26
8.3 DELETE MESSAGES
..
....................................................................................................26
8.4 RECORD A MEMO
.........................................................................
8.5 ANSWERING MACHINE SETTINGS
26
25
4.5 A
DJUST EARPIECE VOLUME...................................................................................12
1 M
HANDSET SPEAKERPHONE
...................................................................................
1
IMPORTANT SAFETY INSTRUCTIONS
When using your telephone equipment, basic safety precautions should always
be followed to reduce the risk of fire, electric shock and injury, including the
1) Read and understand all the instructions.
2) Follow all warnings and instructions marked on the product.
3) Unplug this product from the wall outlet before cleaning. Do not use liquid
cleaners or aerosol cleaners. Use a damp cloth for cleaning.
4)
sink, swimming pool).
5) Do not overload wall outlets and extension cords as this can result in the
6) Unplug this product from the wall outlet and refer servicing to our Repair
•
When the power supply cord or plug is damaged or frayed.
• If the product does not operate normally by following the operating instructions.
•
If the product has been dropped and the cabinet has been damaged.
•
If the product exhibits a distinct change in performance.
7) NEVER use your phone outdoors during a thunderstorm-unplug the
8) Do not use the telephone to report a gas leak in the vicinity of the leak.
9) Use only the supplied NiMH (Nickel Metal Hydride) batteries! The operation
periods for the handsets are only applicable with the default battery capacities
10) The use of other battery types or non-rechargeable batteries/primary cells
can be dangerous. These may cause interference and/or damage to the unit
or surroundings. The manufacturer will not be held liable for damage arising
from such non-compliance.
11) Do not use third party charging bays. Damage may be caused to the batteries.
12) Please ensure the batteries are inserted in the correct polarity.
13) Dispose of batteries safely. Do not immerse them in water, burn them, or put
Package contents
The package contains the following items:
• 1 Handset
• 1 Base station
• 1 Mains power adapter
• 1 Telephone line cord
• 2 AAA rechargeable batteries
• 1 User manual
them where they could get punctured.
Centre under the
following conditions:
following:
near water (for example, near
a bath tub , kitchen
Keep your phone away from hot, humid conditions or strong sunlight,
se this product
and don't let it get wet or u
base from the telephone line and the mains socket when there are storms
in your area. Damage caused by l
ightning is not covered by the guarantee.
To use your handset and base together, you must be able to establish a radio link
between them. The signal between the handset and the base is in accordance
with the normal standards for a DECT phone: Maximum range up to 300 metres
outdoors or 50 metres indoors.
The signal range may decrease if there is any large metal object between the
handset and the base, such as a refrigerator, a mirror, a filing cabinet, metallic
doors or reinforced concrete. The signal strength may also be reduced by other
solid structures like walls, or by other radio or electrical interference.
Note: If you have a Twin, Triple or Quad system, you will also have the requisite
extra handset(s) and batteries, and a charger pod for each extra handset.
risk of fire or electric shock.
3
4
Connection and conditions for use:
You can connect your phone to a direct exchange line (DEL) on a local
exchange with its own phone number; to an extension socket connected to a DEL;
or to an extension on an approved compatible PBX. Do not connect as an
extension to a payphone.
The ringer equivalence numbers (REN) of all equipment (phones, fax machines,
modems, etc.) connected to an exchange line must not add up to more than 4,
otherwise one or more of them may not ring and/or answer calls correctly. The
r telephones have a REN of 1 unless
marked otherwise.
phone has a REN of 1, and most othe
6
5
2 INSTALLING YOUR PHONE
2.1 Connecting the base station
1) Plug the power supply and line cord
into
2) Plug the power adapter into a 230Vac,
3) Always use the cables provided in the box
Warning
: Use only the provided adaptor, using
other power supplies may cause a hazard.
and the line cord into your
the base station.
50Hz mains socket,
2.2 Installing and charging the batteries
1) Place the 2 supplied batteries into the battery
compartment
.
3
GETTING TO KNOW YOUR PHONE
3) Put the handset on the base and charge for
15 hours before using the handset for the first time.
If you have a Broadband line
If you connect your telephone to a line with
insert a micro-filter between the telephone
and the telephone line, otherwise you may get
interference between the telephone and the broadband,
which could cause problems.
a broadband connection, you will need to
telephone line socket.
Warning: Install the base unit in a position where the mains adapter plug
will reach an easily accessible mains socket. Never try to lengthen the
mains power cable.
Note: The base unit needs mains power for normal operation, not just for
charging the handset batteries.
Use only the NiMH rechargeable battery type provided.
2) Position the battery compartment cover over the batteries
click into place.
and slide up to
The handset will give a beep when it is properly placed on the base or charger.
with the polarity markings as shown
In a home with broadband, every telephone must have a micro-filter connected,
not just the one at the telephone point that your modem is connected to.
If you need more broadband micro-filters, contact your broadband supplier.
3.1
Handset Overview
LEFT SOFT KEY(MENU/OK)
In idle mode:Press
to access the main menu
In sub-menu mode:
Press to confirm the selection
During a call: Press to access
Intercom/Phonebook/ Redial
List/ Call List
TALK ON
In idle / predialing mode:
Press to make a call
In Redial list / Call List /
Phonebook list
Press to make a call to
During ringing:
Press to answer a call
RIGHT SOFT KEY(CLEAR/
In sub-menu mode: Press to go
In sub-menu mode: Press and
In editing / predialing mode: Press
In editing / predialing mode:
Press and hold to delete all the
During a call: Press to mute/ unm
In idle mode:Press to intercom
In main menu mode: Press to go
RECALL(also called FLASH)
In idle / predialing mode:
Press to insert a recall
During a call:Press to dial
a recall
TALK OFF
During a call: Press to end a call
In menu / editing mode: Press to
In idle mode:
Press and hold to power off the
In idle mode (when the handset is
UP
In idle mode:
Press to access the call list
In menu mode:
Press to scroll up the menu items
In Phonebook list / Redial list /
Call List:
Press to scroll up the list
During a call:
Press to increase the
earpiece volume
During ringing:
Press to increase the ringer volume
DOWN
In idle mode:
Press to access
In menu mode:
Press to scroll down
In Phonebook list /
Press to scroll down
During a call:
Press to decrease the
During ringing:
Press to decrease the
the redial list
the menu items
Redial list / Call List:
the list
earpiece volume
ringer volume
the displayed entry.
and go back to idle screen
go back to previous menu
handset
powered off): Press and hold to
power on the handset.
BACK/MUTE/INTERCOM)
back to idle screen
back to previous level
hold to go back to idle screen
to clear a character / digit
characters / digits
the microphone
another handset
SPEAKERPHONE
During a call:
Press to turn on / off the
speakerphone.
Call List / Phonebook entry :
Press to make a call with
speakerphone
During ringing:
Press to answer a call with speakerphone
During answering machine message playback /
call screening:
Press to play message via speaker
The LCD display gives you information on the current status of the telephone.
Scroll up / down the menu items / Phonebook list / Redial list / Call List
Steady when the handset is in range of the base. Flashes when out of
Steady when an intercom call is in progress.
Flashes when there is an incoming internal call.
Indicates a call is in progress on that handset.
Indicates that the
ringer is switched off.
Steady when an alarm is set. Flashes when the alarm is sounding.
Indicates that the keypad is locked.
Indicates when you have a new Voice Mail message.
(This is a Caller Display service and is not usually available from
range of the base or not registered to the base.
UK network providers.)
Indicates when the battery is fully charged.
Whole icon flashes when the battery s charging.
Internal block icon flashes when the battery is in final charging stage.
Indicates when the battery needs charging.
Flashes when low battery power level is detected.
(BACK)
(INT)
Indicates when there are more characters or numbers in front of those
Indicates when there are more characters or numbers after those being
Press the MENU/OK key to access the main menu.
Press the MENU/OK key to confirm the current selection.
Indicates new TAM message / new call in TAM message list / call list.
Press the C/MUTE key to start an intercom call.
Press the C/MUTE key to go back to the previous menu level or cancel
Press the C/MUTE key to clear a character, stop the alarm, or mute/unmute
being displayed.
displayed.
the current action.
the microphone during a call.
3.4 Menu
Structure
idle mode, press <MENU/OK>
fer to the following for the menu structure.
3.5.
Key
Press 1st
2
nd
3rd 4th 5th 6th 7th 8th 9th 10th
1
SP
-
1
1
2
A
B
C
2
2
3
D
E
F
3
3
4
G
H
I
4
4
5
J
K
L
5
5
6
M
N
O
6
6
7
P
Q
R
S
7
7
8
T
U
V
8
8
9
W
X
Y
Z
9
9
0
0
0, P (Pause)
*
*
#
#
Alphanumeric Editing
(For phonebook name editing and renaming handset)
Number Editing (For phone
editing, date/time editing)
Ł
Key
Press 1st
2
nd
3rd 4th 5th 6th 7th 8th 9th 10th
1
SP
-
1
1
2
3
D
E
F
3
3
4
G
H
I
4
4
5
J
K
L
5
5
6
M
N
O
6
6
7
P
Q
R
S
7
7
8
T
U
V
8
8
9
W
X
Y
Z
9
9
0
0
0, P (Pause)
*
*
#
#
Alphanumeric Editing
(For phonebook name editing and renaming handset)
Number Editing (For phone
editing, date/time editing)
Key
Press 1st
2
nd
3rd 4th 5th 6th 7th 8th 9th 10th
1
SP
-
1
1
2
A
B
2
2
3
E
3
3
4
H
I
4
4
5
K
5
5
6
6
6
7
7
7
8
8
8
9
9
9
0
0
0, P (Pause)
*
*
#
#
Alphanumeric Editing
(For phonebook name editing and renaming handset)
Number Editing (For phone
editing, date/time editing)
Γ
Δ
Ζ
Θ
Λ
Μ
Ν
Ξ
Ο
Π
Ρ
Σ
Τ
Υ
Φ
Χ
Ψ
Ω
2
Polish Character Set
3.5.3
Norwegian
Character
Set
3.5.4
Greek
Character
Set
3.5 Text and Digit Entry Table
The following table shows you where each letter and punctuation character can
be found, by using repeated presses of the alphanumeric keypad. This will be
helpful when storing a name in the phonebook and renaming your handset.
In editing mode, a cursor is displayed to indicate the current text entry position.
It is positioned at the right of the last character entered.
Writing Tips:
1. Once a character is selected, the cursor will move to the next position after a
short pause.
2. You can move the cursor within the text with the <UP/DOWN> keys to
amend the text entry.
3. Press <C> to delete the last character.
4. Press and hold <C> to delete the entire text string.
3.5.1 English Character
Set
Key
Press 1st
2
nd
3rd 4th 5th 6th 7th 8th 9th 10th
1
space -
1
1
2
A
B
C
2
2
3
D
E
F
3
3
4
G
H
I
4
4
5
J
K
L
5
5
6
M
N
O
6
6
7
P
Q
R
S
7
7
8
T
U
V
8
8
9
W
X
Y Z
9
9
0
0
0, or P (Pause) if press and hold
*
*
?
/
\
(
)
*
#
o
,
-
#
Alphanumeric Editing
(For phonebook name editing and renaming handset )
Number Editing (For phone
number editing,date/time editing)
Key
Key
2 A
Æ B C 2
ADD TO PB
DELETE
DELETE ALL
DETAILS
handset
i
to go to CALL LIST, the first option in the menu list.
Press <UP> or <DOWN> to go to other options in the menu list.
Press <OK> to enter a sub-menu or function.
Press <Back> to go back to the previous level.
Shows EMPTY
or the
f
irst Call
List Entry. Then
<OK> for:
,
,
&
0
Main
Menu CALL LIST PHONEBOOK
BS
SETTINGS
HS
SETTINGS
REGISTRATION DEFAULT ANS. MACHINE
Sub
menu
PIN? - - - -
MSG PLAYBACK
DELETE ALL
MEMO
TAM ON/OFF
TAM SETTINGS
ANSWER MODE
TAM LANGUAGE
OGM SETTINGS
ANSWER DELAY
RECORD TIME
REMOTE ACC
COMPRESSION
PIN? - - - -
<UP/DOWN>
Key Press
<MENU>
<UP/
DOWN>
<UP/
DOWN>
<UP/
DOWN>
<UP/
DOWN>
<UP/
DOWN>
<UP/
DOWN>
phonebook Entry.
ADD
VIEW
EDIT
DELETE
DELETE ALL
PB STATUS
Shows EMPTY
or the
f
irst
Then
<OK> for:
ADD
PB STATUS
or
DIAL MODE
FLASH TIME
CHANGE PIN
ALARM
RING SETUP
TONE SETUP
LANGUAGE
RENAME HS
HS DISPLAY
AUTO ANSWER
DATE & TIME
your answering machine (TAM) is
on and flashes when
a
message.
Indicates that
there is new
3.2 Base Station with Telephone Answering Machine (TAM) Control
3.3 Display Icons and Symbols
7
8
9
10
BS RINGER
RING VOLUME
DELETE HS
CHANGE PIN
BS SCREENING
TAM
ON/OFF
Press to turn on the
Press again to turn off
PLAY/STOP
Press to play
Press to stop
the message
DELETE
Press once to
machine.
Press to increase
+
answering
machine.
playback
the answering
SKIP
BACKWARD
Press to repeat
current message
Press twice to
skip back to the
previous message.
delete the message
during playback
all the old
messages
playing the
SKIP
FORWARD
Press to skip the
current message
and play the next
message.
messages
playback Volume.
Press to
decrease
Volume.
-
layback
the p
MESSAGE
LED
Light On when
TAM is ON
Light Off when
TAM is OFF
Flashes when
new messages
received
from the beginning.
In idle mode, press
and hold to delete
Re
In
5 PRIVATE
PHONEBOOK
Each handset can store up to 50 private phonebook entries with names and
numbers. Each phonebook entry can have a maximum of 20 digits for the
phone number and 12 characters for the name. You can also select different
ringtones for your phonebook entries. (Note: the different ringtones only play if
5.1 Add a New Phonebook Entry
In idle:
1. Press <PHONEBOOK> to access the phonebook.
OR
Press <MENU> and <UP/DOWN> to select
PHONEBOOK
and then press
<OK> to access the phonebook.
2. Press <MENU> to show ADD.
3. Press <OK> and then enter the name.
4. Press <OK> and then enter the number.
5. Press <OK> and <UP/DOWN> to select the desired ringtone for your
6. Press <OK> to store the phonebook entry.
you subscribe to Caller Display and the incoming number matches the stored
number.) Phonebook entries are stored alphabetically by name.
phonebook entry.
5.2 Search a Phonebook Entry
In idle:
1. Press <PHONEBOOK> to access the phonebook.
2. Enter the first letter of the name using the alphanumeric keys(e.g. if it
want.
5.3 View a Phonebook Entry
In idle:
1. Press <PHONEBOOK> to access the phonebook.
2. Press <UP/DOWN> to select the desired phonebook entry.
3. Press <MENU> and <UP/DOWN> to select
VIEW.
4. Press <OK> and <UP/DOWN> to review the name, number and ringtone
of the selected phonebook entry.
Note:
If the number is more than 12 digits, press <LEFT SOFT KEY> or
<RIGHT SOFT KEY> to view the remaining digits.
and then <UP/DOWN> to scroll to the entry you
begins with C, press the 2 key three times),
Remote
operation
Using a tone-dialling phone, dial your home number
You can also use the codes on the other side of this card
While your outgoing message is playing, press
Key in your remote security code
The default code is 0000. For details of how to set a new code,
see the User Guide
8.5.9.1 on page 31.
1
2
3
4
Note:
<
*> key must
be
entered
while
the
OGM
is
still
playing,
and
the
4-digit
co
ns
ec
utiv
ely
, th
e li
ne
w
ill b
e r
ele
as
e d
Note:
If your answering machine is switched off, the phone will enter into
the remote access mode after 10 rings.
You can then enter the 4-digit remote access PIN
(Default Remote Access PIN is 0000) to activate the remote access feature.
Elite 2025 system
The
P
IN
sh
ou
ld
fo
llo
w
w
ith
ou
t a
ny
d
ela
ys
..
If t
he
4
-d
ig
it R
em
ote
A
cc
es
s
P
IN
is
e
nte
re
d in
co
rre
ctly
th
re
e t
im
es
au
to
m
atic
ally
.
11
12
13
14
15
16
4
USING YOUR PHONE
4.1 Make a Call
4.1.1 Preparatory
Dialing
Enter the phone number and press <TALK ON> to
dial the number. When entering the number, if you
to delete digits.
4.1.2 Direct
Dialing
Press <TALK ON> to connect to the line and then
4.1.3 Call from the phonebook
Press <PHONEBOOK> to access the phonebook and press <UP/DOWN> to
Press <TALK ON> to dial out the selected phonebook entry.
(Note: if you enter a wrong digit you cannot correct it with the <C> key.)
Note:
You can also access the phonebook by pressing <MENU/OK>, <DOWN>,
<MENU/OK>
select the desired phonebook entry.
4.1.4 Call from the Call List (only available with Caller Display)
Press <UP> to access the Call List and press <UP/DOWN> to select the desired
Press <TALK ON> to dial out the selected Call List entry.
Note:
You can also access the Call List by pressing <MENU/OK> twice.
4.1.5 Call from the redial list
Press <DOWN> to access the redial list and press <UP/DOWN> to select the
Note:
The alphanumeric keys provide a short-cut to find entries beginning with
the corresponding letters.
Call List entry.
desired redial number.
Press <TALK ON> to dial out the selected redial number.
4.1.6 Call
timer
Your handset automatically times the duration of every call.
The call timer is displayed as soon as you answer a call or 15 seconds after
It is shown in hours, minutes and seconds
4.2 Answer a Call
If the handset is not on the charging cradle:
When the phone rings, press <TALK ON> to answer a call.
Note:
If AUTO ANSWER is set to ON, then lifting the handset off the base or
charger will answer the call automatically, and no buttons need to be
format (HH:MM:SS).
4.3 End a Call
During a call press <TALK OFF> to end the call.
OR
Put the handset on the base station or charger to end the call.
pressed.
4.5 Adjust Volume
There are 5 levels (VOLUME 1 to VOLUME 5) to choose from for the earpiece
During a call:
When you end the call, the setting will remain at the last selected level.
4.6 Mute
a
Call
You can talk to someone nearby without letting the caller hear you during a call.
During a call:
Press <C> to mute the microphone and “
MUTED
” will display on the LCD.
Your caller cannot hear you. Press <C> again to unmute the microphone.
4.7
the
In idle, press and hold <HASH/#> to turn off the handset ringer. The “RINGER
OFF”
volume.
icon is displayed on the LCD.
4.8 Turn on the Keypad Lock
In idle, press and hold <STAR/*> to turn on the keypad
4.9 Redial the last number
You can redial any of the 10 last numbers called. If you have stored a name
number, the name will be displayed instead.
4.9.1 Redial a Number from the Redial List
1. In idle mode, press <DOWN> to access the redial list.
Note:
If the redial list entry shows a name, press <Hash/#> to view the number
2. Press <UP/DOWN> to browse the redial list.
3. Press <TALK ON> to dial to the selected redial number.
Note:
If there are no numbers in the redial list, the display shows
“EMPTY ”
.
Note:
The display will still flash the Call icon and show CALL or the Caller Display
number, when there is an incoming call, even if the ringer is turned off
To turn the ringer back on, press and hold <HASH/#> again.
Note:
You can still use <TALK ON> to answer a call
To turn the keypad lock off, press and hold <STAR/*> again.
icon is displayed on the LCD.
The most recent last number will display at the top of the redial list.
of this entry.
LOCK”
enter the phone number.
handset is ringing.
when the
connect to the line and
make a mistake, press <C>
dialling and remains on the screen for 5 seconds after the end of the call.
Turn off
Handset Ringer
Press <UP/DOWN> to select volume 1-5. The current setting is shown.
in phonebook to go with the
4.4. Handset Speakerphone
During a call, you can press
SPEAKERPHONE
to alternate between hands-free
speakerphone and normal handset use.
4.9.2 Store a Redial Number into the Phonebook
1. Follow Steps 1 and 2 in section 4.9.1.
2. Press <MENU> and <UP/DOWN> to select
ADD TO PB.
3. Press <OK> and then enter the name you want to use in the phonebook.
4. Press <OK> and then modify the number, if necessary.
5. Press <OK> to show <MELODY 1>.
6. Press <UP/DOWN> to browse the ringtone list. The respective ringtone will
be played when browsing the ringtone list. (Note: the selected melody will
7. Press <OK> to confirm, and the entry will be stored.
only be played if you subscribe to Caller Display and the incoming number
matches the stored number.)
4.9.3 Delete a Redial Number
1. Follow Steps 1 and 2 in section 4.9.1.
2. Press <MENU> and <UP/DOWN> to select
DELETE.
3. Press <OK> to confirm, and the entry will be deleted.
4.10 Find the Handset
You can locate the handset by pressing <PAGE> on the base station. All the
handsets registered to the base will produce the paging tone and show
4.9.4 Delete all Redial List entries
1. Follow Steps 1 and 2 in section 4.9.1.
2. Press <MENU> and <UP/DOWN> to select
DELETE ALL.
3. Press <OK> to display <CONFIRM?>.
4. Press <OK> to confirm. All entries will be deleted and the display will show
<EMPTY>.
<TALK OFF> /<C> on any handset or <PAGE> on the base again.
Note:
If there is an incoming call during paging, the phone will ring with the
4.11 Make an Internal Call (
This feature is only applicable when there are at least two registered handsets.
It allows you to make internal calls, transfer external calls from one handset to
incoming call instead of paging.
"PAGING" on the display. You can stop the paging by pressing <TALKON>/
another handset and make conference calls. If the called handset is not
answered within 60 seconds, the called handset will stop ringing and the calling
Note:
If only one handset is registered to the base station, when <C/MUTE/INT>
is pressed, it will display
“NOT POSSIBLE”.
4.11.1 Intercom Another Handset
1. In idle mode, press <C/MUTE/INT> and all the other registered handset
2. Enter the number of the handset that you want to call, or enter "9" to call all
3. The called handset rings and <TALK ON> must be
Note:
If only two handsets are registered to the base station, pressing
<C/MUTE/INT> will call the other handset immediately.
numbers will display, along with a "9".
establish the intercom call.
4.11.3 Transfer an External Call to another handset
During an external call:
1. Press <MENU> and <UP/DOWN> to select
INTERCOM.
2. Press <OK> to show all the other registered handset numbers, plus "9".
3. The external call is put on hold automatically and the called handset rings.
4. Press <TALK ON> on the called handset to establish
Enter the
number for the handset you want to transfer the call to.
handset will return to standby mode.
handsets.
5. Press <TALK OFF> on the calling handset or put the calling handset on the
charging cradle to end the current call with the external party.
6. The external call is transferred to the called handset.
4.11.2 Call All Handsets
1. In idle mode, press <C/MUTE/INT> and the registered handsets will display.
2. Press <KEY 9> to ring to all registered handsets
4.11.4 Make a 3
The conference call feature allows one external call to be shared with two
handsets (in intercom).
The three parties can share the conversation and no additional network
subscription is required.
During an external call:
1. Follow Steps 1 to 4 in section 4.11.3.
2. Press and hold <STAR> on the calling handset to establish the conference call
Either handset can exit the conference by pressing <TALK OFF>, leaving the
other handset still connected to the external call.
pressed on that handset to
an internal call.
Note:
If there is an external call while you are on an intercom call, you'll
answer the external call.
Note: If the other handset has not answered the intercom call, you can stop
the intercom and return to the external call by pressing <TALK OFF>
Multi - handset versions only)
-way Conference Call
hear warning beeps, and you have to end the intercom call, before you can
Electrical power
Base unit:
Ten Pao - S004LB0600045 / S004LV0600045
input 100-240VAC 50/60Hz 150mA,
Charger unit:
output 6VDC 450mA
Ten Pao - S004LB0600030 / S004LV0600030
input 100-240VAC 50/60Hz 150mA,
output 6VDC 300mA
Battery Information
GPI - VT40AAAHC 2x1.2V AAA size 400mAh NiMH
BYD - H-AAA400A 2x1.2V AAA size 400mAh NiMH
Caution
Risk of explosion if battery is replaced by an incorrect type
Dispose of used batteries according to the instructions.
Port specification
The
port (connec ted to the mains power
respect to EN41003.
a SELV port with
supply) is
respect to EN41003.
The port (connected to the telephoneline) is a TNV port with
