Operation
45
Driving on headlands
Maintain the angle of lock
The angle between the cross beam and drawbar must never be less
than 90°. The top cardan shaft can get upset. Upset cardan shafts can
cause damage to the implement.
Drive as follows on headlands:
> If necessary, lift the implement with the single-acting control device
to run over swaths
> Turn the tractor with implement so as not to fall below the angle of
lock of 90 degrees
> Lower the implement again using the single-acting control device
to create new swath
N
OTE
The cardan shaft must not be switched off when driving on headlands.
Angle not less than
90°
Top cardan shaft
Distance "a" at
least 20 mm
All manuals and user guides at all-guides.com
