42
Operation
Operation
Safety
The following applies for all areas of application:
No riding on the implement
Neither personnel nor objects are allowed to be transported on the im-
plement at any time. Riding on the implement is hazardous and strictly
prohibited.
There should be no persons standing in the slew range
Ensure that there are no personnel in the slewing zone and working
area of the implement. Personnel can be caught by the working ele-
ments and can suffer serious injuries with fatal consequences.
Maximum cardan shaft speed 540 rpm
The cardan shaft speed must not exceed 540 rpm and has to be ad-
apted to the condition of the fodder. Higher speeds can cause damage
to the implement.
Cardan shaft coupling
Do not let the slip clutch respond for longer than 10 seconds. If the
clutch responds for a longer period of time, it will wear and the cut-off
torque will drop.
Do not upset the cardan shaft
The cardan shaft between the tractor and implement must not be up-
set in any operating or transport position. Upset cardan shafts can
cause damage to the implement and tractor.
Maintain the angle of lock
The angle between the cross beam and drawbar must never be less
than 90°. The top cardan shaft can get upset. Upset cardan shafts can
cause damage to the implement.
Angle not less than
90°
Top cardan shaft
Distance "a" at
least 20 mm
All manuals and user guides at all-guides.com