Preparations on the field
41
Swath former,
front [+]
Collision danger
When working with the front swath former ensure that the raking wheel
arms do not collide with the front swath cloth in any working condition.
The swath former can be damaged by the tine arms.
Swath width
Set the width of the swath former as follows:
> Loosen the T-screws
> Insert or pull out the swath former
> Tighten the T-screws, slightly moving the swath former up and
down to create a secure connection
> Lock the T-screws with the shackles
Setting the height
and in drive direction
Collision danger on the swath former
When swathing in the "Single swath" position the swath former must
be pushed forwards. The swath former can be damaged by the rear
raking wheel tines.
The front swath former has to be set in height and drive direction as
follows:
> Loosen and remove the screws
> Shift the swath former in height and drive direction
> Secure it in the new position with the screws
In the operating position "Single swath" illustrated
•
insert the front swath former into the transport holder or
•
pull it out by 500 mm at the maximum and fasten it in the rearmost
hole pattern.
Swath former
T-screws with shackles
Screws
Collision danger
Maximum 500 mm
All manuals and user guides at all-guides.com
