Safety
7
Cardan shaft
Use only the cardan shafts prescribed by the manufacturer and read
the attached operating manual attentively. Adapt the length of the car-
dan shaft as required. The wrong cardan shaft lengths can cause da-
mage to the implement and injuries to personnel.
Check and fix the cardan shaft guard
The rotating cardan shaft is protected by the cardan shaft guard. En-
sure that the guard is not damaged. Fix the cardan shaft guard by con-
necting the chains on the implement and tractor faces. Unguarded
cardan shafts can cause life-threatening injuries.
Maximum cardan shaft speed 540 rpm
The prescribed maximum cardan shaft speed of 540 rpm must not be
exceeded. Higher rpm's can cause damage to the implement.
Hydraulic connection at zero pressure only
Only connect hydraulic tubes to the tractor hydraulic system if the trac-
tor and implement hydraulic system is depressurised. A pressurised
hydraulic system can trigger unforeseeable movements on the imple-
ment.
High pressures in the hydraulic system
The hydraulic system is under high pressure. Regularly check all
pipes, hoses and bolted connections for leaks and externally visible
damage. Only use suitable agents when looking for leaks. Eliminate
damage immediately. Escaping fluid may result in injuries and fires.
Seek medical attention immediately if injuries occur.
Colour-coded hydraulic connections
To avoid operating errors, the plug sockets and plugs of the hydraulic
connections between the tractor and implement are colour coded.
Wrongly connected hydraulic hoses can trigger unforeseen move-
ments on the implement.
All manuals and user guides at all-guides.com
