6
Safety
Meaning of warning sym-
bols
Read the operating manual
Read and observe the operating manual and the safety regulations
prior to initial operation!
Switch off the engine
Perform all maintenance, repair and adjusting work only when the im-
plement is at a standstill.
Keep your distance
Keep your distance from the rotating raking wheel. When the wheel ra-
ke is in operation nobody is allowed in the immediate vicinity of the im-
plement!
Maximum cardan shaft speed 540 rpm
The prescribed maximum cardan shaft speed of 540 rpm must not be
exceeded.
Risk of crushing
Never reach into the zone where there is a risk of getting crushed as
long as any parts there are able to move.
Maximum hydraulic pressure 210 bar
The hydraulic pressure of the tractor on the implement's hydraulic sy-
stem must not exceed 210 bar.
Who is allowed to
operate the imple-
ment
Only qualified personnel
Only qualified persons who have been informed of the dangers asso-
ciated with handling the implement are permitted to operate, service
or repair the implement. As a rule, such persons are trained and ex-
perienced in agricultural work or have been thoroughly trained in a si-
milar fashion.
Coupling
Increased risk of injury
When coupling the implement to the tractor, there is an increased risk
of injury. Therefore:
•
secure the tractor against rolling away, shut off the engine and take
out the ignition key
•
never stand between the tractor and the implement during coupling
•
when hitching onto the lift link drawbar fix the lower link laterally
and lock the three-point power lift against lifting and lowering.
•
lock the cardan shaft securely to the PTO shaft end of the tractor
and implement
If this is not complied with, the consequence can be damage to the im-
plement and even life-threatening injuries.
All manuals and user guides at all-guides.com
