10
Safety
Uncoupling the im-
plement
Increased risk of injury
There is an increased risk of injury when uncoupling the implement
from the tractor. Therefore:
•
Secure the tractor against rolling away, switch off and take out the
ignition key
•
Never stand between the tractor and the implement during uncou-
pling.
•
Ensure that the implement is standing on a flat and stable surface
•
Ensure that the parking leg is securely locked
•
Set the cardan shaft down on the mounting provided
•
Secure the implement against rolling away (use wheel wedges)
•
Do not disconnect the hydraulic hoses until the hydraulic system is
unpressurised on both the tractor and implement faces
If this is not complied with, the consequence can be serious or fatal
injuries.
Care and Mainte-
nance
Follow the care and maintenance chart
Observe prescribed intervals for maintenance checks and inspections
specified in the operating manual. If these intervals are not complied
with, damage to the implement and accidents can be caused.
Only use OEM replacement parts (original equipment manufac-
turers).
Many components have special properties that are decisive for the
stability
and operability of the implement. Only spare and wear parts
supplied by the manufacturer have been tested and cleared. Using
other products may lead to malfunctions or reduce safety of operation.
The use of non-OEM replacement parts renders the manufacturer's
guarantee null and void and frees the manufacturer from all liability.
When performing care and maintenance work:
•
Switch off the cardan shaft drive
•
Depressurise the hydraulic system
•
Whenever possible, uncouple the tractor
•
Switch off the tractor and withdraw the ignition key
•
Make sure the implement is standing safely. Provide additional
supports as required
•
Do not use parts of the implement to climb onto it; use only secure
steps, ladders or other means of access
•
Secure the implement against rolling away (use wheel wedges)
Only if these regulations are complied with is safety ensured during
care and maintenance work.
Turn off the electrical supply
Prior to carrying out work on the electrical system, disconnect it from
the power supply. Equipment under electrical power can cause dama-
ge to equipment and injury to persons.
All manuals and user guides at all-guides.com
