82
[4.9.3] Setting the DHCP
On the SET TCP/IP, FTP and DHCP menu, selecting "3: DHCP" calls
up the screen shown at left. The current setting is displayed.
[1] TIMEOUT:
Sets the timeout for getting the IP configuration from
the DHCP server. The entry range is from 00001 to
32767 seconds.
You can enter up to 32767 seconds, but in
actual operation, a maximum of 190 seconds
are available since the number of retries and
retry intervals are determined in your system.
C
key
⇑
⇓
Period (.) key with
SF
held down
Press the
ENT
key. The entry box of the selected item becomes ready
to accept entry and shows a cursor.
Enter the desired value using the numerical keys and then press the
ENT
key.
In the entry mode, to delete a single character, press the
BS
key. To
delete the whole entry you made, press the
C
key.
To return to the SET TCP/IP, FTP and DHCP menu, press the
C
key
when any item is highlighted.
If you press the period (.) key while holding down the
SF
key, the
obtained IP configuration appears as shown at left. To return to the
SET DHCP screen shown above, press the
C
key.
If you display the obtained IP configuration when any of the IP
address, subnet mask and default gateway is set to any value other
than "0.0.0.0," the (DHCP) does not appear on the screen shown
at left.
