126
If an error occurs during uploading
If some error occurs during uploading, the BHT beeps three times and shows one of the following
screens:
To retry the uploading operation, press the
1
and
ENT
keys; to abort it, press the
2
and
ENT
keys.
Press the
C
key to return to the SYSTEM MESSAGE transfer menu.
"
Problem
The memory is insufficient for setting up the system message file.
"
Solution
Press the
C
key to return to the SYSTEM MENU, then delete
unnecessary files in the memory. (Refer to Section 2.5.3, [ 9 ].)
"
Problem
The memory has already contained 120 files, so the BHT system
message file cannot be set up.
"
Solution
Press the
C
key to return to the SYSTEM MENU, then delete
unnecessary files in the memory. (Refer to Section 2.5.3, [ 9 ].)
"
Problem
Uploading has failed.
"
Solution
To retry uploading, press the
1
key.
To return to the SYSTEM MENU, press the
2
key. Check the interface
port, communications parameters, and communications protocol type
in the SET SYSTEM menu or perform the communications test in the
TEST menu. (Refer to Section 2.5.3, [4.5] and [5.7].)
It is also necessary to check the communications parameters setup of
the host computer.
