Chapter 2 Getting Started the BHT and System Mode
107
[8.1.1] ID entry screen
Selecting the "1:ID" on the RF parameter menu calls up the screen
shown at left where the current setting is displayed.
[1] SSID Sets a service set ID to be used on the RF communications
network.
Press the
ENT
key. The screen enters the alphanumeric entry mode
in which a cursor appears.
Make the desired settings with the numerical keys and period (.) key.
To switch the entry mode between the numeric mode (without
guidance) and alphabet mode, press the
SF
key. After completion of
settings, press the
ENT
key.
In the entry mode, to delete a single character, press the
BS
key. To
delete the whole entry you made, press the
C
key.
For details about the client name and service set ID, refer to Section
3.1.2.
Pressing the
C
key when any item is highlighted will display the
confirmation message as shown at left.
To save the new entry, choose "1:Yes" and press the
ENT
key. The
screen will return to the RF parameter menu.
To cancel the new entry, choose "2:No" and press the
ENT
key. The
newly entered data will be discarded and the screen will return to the
RF parameter menu.
