manualshive.com logo in svg

Denso BHT-300QW, User Manual

The Denso BHT-300QW User Manual is available for free download on our website. This comprehensive manual provides step-by-step instructions to help you navigate and utilize all the features of the Denso BHT-300QW efficiently. Enhance your user experience by accessing the manual at manualshive.com.

Share
Download
background image

90

 

[5.7] Communications 

test 

In System Mode, you can test the IrDA interface port and direct-connect interface port. 

"

 Preparation for the IrDA interface test 

Arrange two BHTs, one as a master station and the other as a slave station (to be tested) with their IrDA 
interface ports facing each other as illustrated below. In this test, the slave BHT transmits data to the 
master BHT and receives the data sent back from the master BHT. 

 

 

 

"

 Preparation for the direct-connect interface test 

Arrange a 3-pole mini stereo plug as illustrated below and connect it to the direct-connect interface port 
on the BHT. 

 

 

 

 

On the TEST menu, selecting the "7: COMMUNICATION" calls up the 
screen shown at left. 

[1] 

OPTICAL: 

Switches to the MASTER/SLAVE selection 
screen for the IrDA interface test. 

[2] CONNECTOR: 

Tests the direct-connect interface port. 

Select the desired item directly using the corresponding numerical 
keys or indirectly using the 

F5

 and 

F6 

keys, then press the 

ENT

 key. 

 

 

Summary of Contents for BHT-300QW









































































































































































































Reviews:

No comments

Related manuals for BHT-300QW

NCD ThinSTAR 200 Installation Manual preview
ThinSTAR 200
Brand: NCD Pages: 12
Aaeon ONYX-215 Manual preview
ONYX-215
Brand: Aaeon Pages: 47
Samsung SPT 4700 Setting-Up Manual preview
SPT 4700
Brand: Samsung Pages: 12
Samsung SAM4S ECR SPS-1000 User Manual preview
SAM4S ECR SPS-1000
Brand: Samsung Pages: 124
Texas Instruments Silent 700 763 Operating Instructions Manual preview
Silent 700 763
Brand: Texas Instruments Pages: 88
3nStar PTA0156 User Manual preview
PTA0156
Brand: 3nStar Pages: 12
POSIFLEX Jiva TP-5815 Pro series Technical Manual preview
Jiva TP-5815 Pro series
Brand: POSIFLEX Pages: 100
UTC RETAIL T6100 Installation Manual preview
T6100
Brand: UTC RETAIL Pages: 5
UTC RETAIL 3190 Series User Manual preview
3190 Series
Brand: UTC RETAIL Pages: 11
UTC RETAIL ultimatouch 1800 series Installation Manual preview
ultimatouch 1800 series
Brand: UTC RETAIL Pages: 12
UTC RETAIL ultimatouch 1800 series User Manual preview
ultimatouch 1800 series
Brand: UTC RETAIL Pages: 15
UTC RETAIL 3100 Series Installation Manual preview
3100 Series
Brand: UTC RETAIL Pages: 18
Sagem RT30F - PCS Basic Manual preview
RT30F - PCS
Brand: Sagem Pages: 33
New Pos Technology NEW9220 Product Manual preview
NEW9220
Brand: New Pos Technology Pages: 5
Rapyd INGENICO MOVE 3500 MOBILE Getting Started preview
INGENICO MOVE 3500 MOBILE
Brand: Rapyd Pages: 10
Datalogic Joya Touch A6 HC User Manual preview
Joya Touch A6 HC
Brand: Datalogic Pages: 214
Johnson Controls METASYS Series Installation Sheet preview
METASYS Series
Brand: Johnson Controls Pages: 12
XAC xCE-200WU-U Installation Manual preview
xCE-200WU-U
Brand: XAC Pages: 10

Brands by name

Popular brands

Load more brands