manualshive.com logo in svg

Denso BHT-300QW, User Manual

The Denso BHT-300QW User Manual is available for free download on our website. This comprehensive manual provides step-by-step instructions to help you navigate and utilize all the features of the Denso BHT-300QW efficiently. Enhance your user experience by accessing the manual at manualshive.com.

Share
Download
background image

162

 

5.3  Applying Power to the CU-300 

CU-301: 

The CU-301 should be powered from a wall socket via the dedicated AC adapter. Connect the outlet 
plug of the AC adapter to the power inlet connector of the CU-301, then plug the other end into a wall 
socket. Pressing the | side of the power switch turns the CU-301 on; pressing the 

!

 side turns it off. 

CU-321: 

The CU-321 should be powered from a wall socket via the dedicated AC adapter or from the USB host 
(computer) or USB hub via the USB interface. 

Connecting the AC adapter supplies power to the CU-321. If no AC adapter is connected, turning on the 
USB host (computer) and USB hub supplies power to the CU-321. 

NOTE:

 To charge the battery cartridge, use the AC adapter except when the CU-321 is connected to a 

self-powered hub capable of supplying power (5V 500 mA) via the USB line. 

NOTE:

 To charge the battery cartridge even when the USB host (computer) is in suspend mode, use the 

AC adapter. 

CU-311: 

The CU-311 should be powered from a wall socket via the dedicated AC adapter. Connect the outlet 
plug of the AC adapter to the power inlet connector of the CU-311, then plug the other end into a wall 
socket. 

 
 

 

 

 

AC adapter 

Power inlet connector 

Summary of Contents for BHT-300QW









































































































































































































Reviews:

No comments

Related manuals for BHT-300QW

Allvag HioPOS Plus User Manual preview
HioPOS Plus
Brand: Allvag Pages: 20
NEW POS 6210 Product Manual preview
6210
Brand: NEW POS Pages: 7
Mercury 2+ User Manual preview
2+
Brand: Mercury Pages: 82
Lear Siegler ADM 3A User'S Reference Manual preview
ADM 3A
Brand: Lear Siegler Pages: 54
Thrane&Thrane TT-3000LRIT mini-C Installation Manual preview
TT-3000LRIT mini-C
Brand: Thrane&Thrane Pages: 35
Nexcom NPT-1500 User Manual preview
NPT-1500
Brand: Nexcom Pages: 39
UNIVIEW OET-213H-NB User Manual preview
OET-213H-NB
Brand: UNIVIEW Pages: 87
First Data VeriFoneVX820 Duet Quick Setup Manual preview
VeriFoneVX820 Duet
Brand: First Data Pages: 8
Designa AKS 100 COMPACT Manual preview
AKS 100 COMPACT
Brand: Designa Pages: 31
POSIFLEX KS - 6215N User Manual preview
KS - 6215N
Brand: POSIFLEX Pages: 20
POSIFLEX KS-6810 SERIES Technical Manual preview
KS-6810 SERIES
Brand: POSIFLEX Pages: 50
ICS Auto Sentry-eXP Maintenance Manual preview
Auto Sentry-eXP
Brand: ICS Pages: 109
NCR RealPOS 60 Hardware Service Manual preview
RealPOS 60
Brand: NCR Pages: 60
Raveon Technologies Corporation WayWORD Technical And User Manual preview
WayWORD
Brand: Raveon Technologies Corporation Pages: 21
FingerTec FACE ID 2 Quick Start Manual preview
FACE ID 2
Brand: FingerTec Pages: 5
EBN Technology TM50A-5B-VR Service Manual preview
TM50A-5B-VR
Brand: EBN Technology Pages: 14
Honeywell Notifier TAD-FTT Manual preview
Notifier TAD-FTT
Brand: Honeywell Pages: 6
Honeywell T80 Quick Manual preview
T80
Brand: Honeywell Pages: 12

Brands by name

Popular brands

Load more brands