Chapter 2 Getting Started the BHT and System Mode
129
[14.2] Updating the CU-311 System via the BHT
On the MODIFY MENU screen (that can be called up by pressing the
period (.) key with the
SF
key held down on the SYSTEM MENU),
selecting "2: CU-F/W MODIFY" calls up the menu screen shown at
left.
[1] DO IT:
Updates the current CU-311 system.
[2] FILENAME: Allows you to enter the filename of a CU-311
system reconfig file that you want to send to the
CU-311.
Select the desired item directly using the corresponding numerical
keys or indirectly using the
F5
and
F6
keys, and then press the
ENT
key.
To specify a CU-311 system reconfig file to be sent, select "2:
FILENAME." The entry box becomes ready to accept entry and a
cursor appears. Enter the desired value using the numerical keys and
period (.), and then press the
ENT
key.
Pressing the
SF
key switches the entry mode between the numeric
mode (without a guidance) and alphabet mode.
In the entry mode, to delete a single character, press the
BS
key. To
delete the whole entry you made, press the
C
key.
Updating the CU-311 System
To start updating, select "1: DO IT." While displaying the screen
shown at left, the BHT starts updating the current CU-311 system.
⇓
(CU system updating completion screen)
If the CU-311 system updating completes normally, the screen shown
at left will appear.
To return to the CU-F/W MODIFY menu screen, press the
C
key.
