ix
!
Proper Care of the BHT and CU
Clean the BHT's charge terminals and battery cartridge terminals with a cotton swab or the like
periodically. Clean the BHT housing with a dry, soft cloth. Before cleaning, be sure to turn the BHT off
and unplug the AC adapter of the CU.
•
Never use benzene, alcohol, or other organic solvents. The
housing may be marred or the paint may come off.
•
Never rub or strike the liquid crystal display (LCD) with anything
hard. The LCD surface will be easily scratched or broken.
•
When cleaning the keypad, do not scrub the surface too hard.
Doing so may break the keys.
Thinner Benzine
•
If the BHT or CU becomes smudged, moisten a soft cloth with neutral detergent and wring it out
thoroughly. Wipe the BHT or CU with the cloth and then go over it again with a dry cloth.
Dust or dirt accumulating on the clear plate of the reading window will affect reading performance. If you
use the BHT in dusty areas, therefore, periodically check the clear plate of the reading window and clean
it if dusty.
•
To clean the plate, first blow the dust away with an airbrush. Then wipe the plate with a cotton swab or
the similar soft one gently.
•
If sand or hard particles have accumulated, never rub the plate; doing so will scratch or damage it.
Blow the particles away with an airbrush or a soft brush.
