Chapter 4 Parameters
|
4-26
Revision July 2008, EG03, SW V1.06
00 - 10
Feedback Signal Actual Value
Factory setting: Read Only
This parameter displays feedback signal value.
00 - 11
Feedback Signal (%)
Factory setting: Read Only
This parameter displays feedback signal value(%).
00 - 12
User Target Value (Low bit) uL 0-99.99
Factory setting: Read Only
00 - 13
User Target Value (High bit) uH 0-9999
Factory setting: Read Only
User Target Value = Actual output frequency (0-04)
×
User Defined Multiplier (02-10).
Maximum summed display of both parameters is 999999.99.
When User Target Value <=99.99, 00-12=0.
00 - 14
PLC Time
Factory setting: Read Only
This parameter displays remaining time of PLC each step.
00 - 15
Output Reactive Power (KVAR)
Factory setting: Read Only
This parameter displays reactive power of AC drives.
Summary of Contents for AC Motor Drive VFD-G
Page 1: ......
Page 2: ......
Page 3: ......
Page 141: ...Chapter 4 Parameters 4 90 Revision July 2008 EG03 SW V1 06 This page intentionally left blank...
