DeLorme Topo USA 8.0 User Manual Download Page 28

Page: 28 / 280

Topo USA User Guide

ZIP/Postal Code

Within the U.S.: #####
(5-digit ZIP Codes only)
Within Canada: ### 6-
digit Postal Codes only)

04096
J8E756

Minor Point of Interest

POI name, City, State

Subway, Columbus, OH

POI/landmark name

Mount Rushmore

Major Point of Interest or
Landmark

POI/landmark name,

State

Space Needle, WA

Latitude/Longitude

See Chart of Supported of Supported Coordinate

Formats

For more information about the Find tab, see the Help topics under Finding a

Location on the Map.

Exiting the Program

To exit the program, click the Close button

in the upper-right corner of the

screen.

The Save Changes dialog box opens if you made changes to a project.

•

Click Yes to save changes.
Note If only one change was made, the program closes after you save the
project.

•

Click No to discard changes and close the program.

•

Click Cancel to return to Topo USA.

No changes are saved.

If you made more than one change to the project or changes to more than one
project, once you save your project, the Exit dialog box opens.

•

Click Save and Exit to save changes to the selected files and close the
program.
Note Clear the check box for any file you do not want to save.

•

Click No to discard changes and close the program.

•

Click Cancel to return to Topo USA.

No changes are saved.

Summary of Contents for Topo USA 8.0

























































































































































































































































































Search results

Summary of Contents for Topo USA 8.0

Reviews:

Related manuals for Topo USA 8.0

Brands by name

Popular brands

DeLorme Topo USA 8.0, User Manual

Search results

Summary of Contents for Topo USA 8.0

Reviews:

Related manuals for Topo USA 8.0

Brands by name

Popular brands