manualshive.com logo in svg

Dell Z9000, Configuration Manual

Share
Download
Dell Z9000 Configuration Manual Download Page 70

ftp-server username nairobi password 0 zanzibar

Dell#

Configuring FTP Server Parameters

After you enable the FTP server on the system, you can configure different parameters.
To specify the system logging settings, use the following commands.

• Specify the directory for users using FTP to reach the system.

CONFIGURATION mode

ftp-server topdir 

dir

The default is the internal flash directory.

• Specify a user name for all FTP users and configure either a plain text or encrypted password.

CONFIGURATION mode

ftp-server username 

username

 password [

encryption-type

] 

password

Configure the following optional and required parameters:
–

username

: enter a text string.

–

encryption-type

: enter 

0

 for plain text or 

7

 for encrypted text.

–

password

: enter a text string.

NOTE: You cannot use the 

change directory (cd)

 command until you have configured 

ftp-

server topdir

.

To view the FTP configuration, use the 

show running-config ftp

 command in EXEC privilege mode.

Configuring FTP Client Parameters

To configure FTP client parameters, use the following commands.

• Enter the following keywords and slot/port or number information:

– For a 10-Gigabit Ethernet interface, enter the keyword 

TenGigabitEthernet

 then the slot/port 

information.

– For a 40-Gigabit Ethernet interface, enter the keyword 

fortyGigE

 then the slot/port information.

– For a Loopback interface, enter the keyword 

loopback

 then a number from 0 to 16383.

– For a port channel interface, enter the keywords 

port-channel

 then a number.

– For a VLAN interface, enter the keyword 

vlan

 then a number from 1 to 4094.

CONFIGURATION mode

ip ftp source-interface 

interface

• Configure a password.

CONFIGURATION mode

ip ftp password 

password

• Enter a username to use on the FTP client.

CONFIGURATION mode

ip ftp username 

name

70

Management

Summary of Contents for Z9000









































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands