manualshive.com logo in svg

Dell Z9000, Configuration Manual

Share
Download
Dell Z9000 Configuration Manual Download Page 450

  switchport

  mac learning-limit 1 dynamic no-station-move

  mac learning-limit station-move-violation log

  no shutdown

Learning Limit Violation Actions

To configure the system to take an action when the MAC learning limit is reached on an interface and a 
new address is received using one the following options with the 

mac learning-limit

 command, use 

the following commands.

• Generate a system log message when the MAC learning limit is exceeded.

INTERFACE mode

learn-limit-violation log

• Shut down the interface and generate a system log message when the MAC learning limit is 

exceeded.
INTERFACE mode

learn-limit-violation shutdown

Setting Station Move Violation Actions

no-station-move

 is the default behavior. You can configure the system to take an action if a station 

move occurs using one the following options with the 

mac learning-limit

 command.

To display a list of interfaces configured with MAC learning limit or station move violation actions, use the 
following commands.

• Generate a system log message indicating a station move.

INTERFACE mode

station-move-violation log

• Shut down the first port to learn the MAC address.

INTERFACE mode

station-move-violation shutdown-original

• Shut down the second port to learn the MAC address.

INTERFACE mode

station-move-violation shutdown-offending

• Shut down both the first and second port to learn the MAC address.

INTERFACE mode

station-move-violation shutdown-both

• Display a list of all of the interfaces configured with MAC learning limit or station move violation.

CONFIGURATION mode

show mac learning-limit violate-action

NOTE: When the MAC learning limit (MLL) is configured as 

no-station-move

, the MLL will be 

processed as static entries internally. For static entries, the MAC address will be installed in all 
port-pipes, irrespective of the VLAN membership.

450

Layer 2

Summary of Contents for Z9000









































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands