manualshive.com logo in svg

Dell Z9000, Configuration Manual

Share
Download
Dell Z9000 Configuration Manual Download Page 444

Enabling the Verification of Member Links Utilization in a 

High-Gigabit Port Channel

This procedure is supported on the Z9000 platform.
To examine the working efficiency of the high-Gigabit Ethernet port channel interfaces, perform the 
following steps:

1.

Use the 

hg-link-bundle-monitor slot 

slotId

 npuUnit 

npuUnitId

 hg-port-channel 

portChannelId

 enable

 command in Global Configuration mode to enable this functionality to 

detect the working efficiency of the high-Gigabit port channel bundle interfaces.
CONFIGURATION mode

Dell(conf)#hg-link-bundle-monitor slot 0 npuUnit 0 hg-port-channel 0 enable 

2.

Specify the trigger threshold for higig link bundle monitoring.
CONFIGURATION mode

Dell(conf)#hg-link-bundle-monitor trigger-threshold 30

3.

Specify the interval in seconds for higig link bundle monitoring.
CONFIGURATION mode

Dell(conf)#hg-link-bundle-monitor rate-interval 10 

4.

Enable the generation of traps for higig link-bundle monitoring.
CONFIGURATION mode

Dell(conf)#snmp-server enable traps hg-lbm

5.

Use the 

show hg-link-bundle-distribution

 command to display the traffic-handling and 

utilization of the member interfaces of the port channel. The following table describes the output 

fields of this show command.
EXEC, EXEC Privilege modes

Dell#show hg-link-bundle-distribution 0 npuUnit 5 hg-port-channel 0

Viewing Buffer Utilization and Queue Statistics on High-

Gigabit Ethernet Backplane Ports

This functionality is supported on the Z9000 platform.

You can now view the queue statistics and buffer utilization counters for the internal leaf port and spine 
port queues using the appropriate show commands. Transmit and receive counters and drop counters 
per queue are computed and displayed for internal queues on high-Gigabit Ethernet ports in the leaf and 
spine nodes. Buffer utilization counters supported for front-end ports are extended to high-Gigabit 
backplane ports.

Buffer counters include a new metric or parameter called Total Count cells. This field contains the total 
number of cells currently being used by all queues on all ports in a port pipe. The f10-bp-stats.mib is for 
statistics collection of backplane ports. Valid backplane ports for leaf NPU units range from 34-41 and for 

444

Link Aggregation Control Protocol (LACP)

Summary of Contents for Z9000









































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands