manualshive.com logo in svg

Dell Z9000, Configuration Manual

Share
Download
Dell Z9000 Configuration Manual Download Page 685

Enabling RIP Globally

By default, RIP is not enabled in Dell Networking OS.
To enable RIP globally, use the following commands.

1.

Enter ROUTER RIP mode and enable the RIP process on Dell Networking OS.
CONFIGURATION mode

router rip

2.

Assign an IP network address as a RIP network to exchange routing information.
ROUTER RIP mode

network 

ip-address

Examples of Verifying RIP is Enabled and Viewing RIP Routes

After designating networks with which the system is to exchange RIP information, ensure that all devices 
on that network are configured to exchange RIP information.

The Dell Networking OS default is to send RIPv1 and to receive RIPv1 and RIPv2. To change the RIP 
version globally, use the 

version

 command in ROUTER RIP mode.

To view the global RIP configuration, use the 

show running-config

 command in EXEC mode or the 

show config

 command in ROUTER RIP mode.

Dell(conf-router_rip)#show config

!

router rip

  network 10.0.0.0

Dell(conf-router_rip)#

When the RIP process has learned the RIP routes, use the 

show ip rip database

 command in EXEC 

mode to view those routes.

Dell#show ip rip database

Total number of routes in RIP database: 978

160.160.0.0/16

    [120/1] via 29.10.10.12, 00:00:26, Fa 1/4

160.160.0.0/16    auto-summary

2.0.0.0/8

    [120/1] via 29.10.10.12, 00:01:22, Fa 1/4

2.0.0.0/8         auto-summary

4.0.0.0/8

    [120/1] via 29.10.10.12, 00:01:22, Fa 1/4

4.0.0.0/8         auto-summary

8.0.0.0/8

    [120/1] via 29.10.10.12, 00:00:26, Fa 1/4

8.0.0.0/8         auto-summary

12.0.0.0/8

    [120/1] via 29.10.10.12, 00:00:26, Fa 1/4

12.0.0.0/8        auto-summary

20.0.0.0/8

    [120/1] via 29.10.10.12, 00:00:26, Fa 1/4

20.0.0.0/8        auto-summary

29.10.10.0/24 directly connected,Fa 1/4

29.0.0.0/8        auto-summary

31.0.0.0/8

    [120/1] via 29.10.10.12, 00:00:26, Fa 1/4

31.0.0.0/8        auto-summary

Routing Information Protocol (RIP)

685

Summary of Contents for Z9000









































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands