ND base reachable time is 30000 milliseconds
ND retransmit interval is 1000 milliseconds
ND hop limit is 64
Showing IPv6 Routes
To view the global IPv6 routing information, use the following command.
• Show IPv6 routing information for the specified route type.
EXEC mode
show ipv6 route
type
The following keywords are available:
– To display information about a network, enter
ipv6 address
(X:X:X:X::X).
– To display information about a host, enter
hostname
.
– To display information about all IPv6 routes (including non-active routes), enter
all
.
– To display information about all connected IPv6 routes, enter
connected
.
– To display information about brief summary of all IPv6 routes, enter
summary
.
– To display information about Border Gateway Protocol (BGP) routes, enter
bgp
.
– To display information about ISO IS-IS routes, enter
isis
.
– To display information about Open Shortest Path First (OSPF) routes, enter
ospf
.
– To display information about Routing Information Protocol (RIP), enter
rip
.
– To display information about static IPv6 routes, enter
static
.
– To display information about an IPv6 Prefix lists, enter
list
and the prefix-list name.
Examples of the
show ipv6 route
Commands
The following example shows the
show ipv6 route summary
command.
Dell#show ipv6 route summary
Route Source Active Routes Non-active Routes
connected 5 0
static 0 0
Total 5 0
The following example shows the
show ipv6 route
command.
Dell#show ipv6 route
Codes: C - connected, L - local, S - static, R - RIP,
B - BGP, IN - internal BGP, EX - external BGP,LO - Locally Originated,
O - OSPF, IA - OSPF inter area, N1 - OSPF NSSA external type 1,
N2 - OSPF NSSA external type 2, E1 - OSPF external type 1,
E2 - OSPF external type 2, i - IS-IS, L1 - IS-IS level-1,
L2 - IS-IS level-2, IA - IS-IS inter area, * - candidate default,
Gateway of last resort is not set
Destination Dist/Metric, Gateway, Last Change
-----------------------------------------------------
C 600::/64 [0/0]
Direct, Te 1/24, 00:34:42
C 601::/64 [0/0]
Direct, Te 1/24, 00:34:18
396
IPv6 Routing
Summary of Contents for Z9000
