manualshive.com logo in svg

Dell XPS 720, Owner'S Manual, Page: 9 / 220

Share
Download
Dell XPS 720 Owner'S Manual Download Page 9

Finding Information

9

Finding Information

 

NOTE: 

Some features or media may be optional and may not ship with your computer. Some features or media may 

not be available in certain countries.

 

NOTE: 

Additional information may ship with your computer.

What Are You Looking For?

Find It Here

• A diagnostic program for my computer
• Drivers for my computer
• My device documentation
• Desktop System Software (DSS)

Drivers and Utilities Media

Documentation and drivers are already installed on your 
computer. You can use the 

Drivers and Utilities

 media to 

reinstall drivers (see "Reinstalling Drivers and Utilities" on 
page 76), access your documentation or run the Dell 
Diagnostics (see "Dell Diagnostics" on page 72).

Readme files may also be 
included on your media to 
provide last-minute 
updates about technical 
changes to your computer 
or advanced technical 
reference material for 
technicians and 
experienced users.

NOTE: 

Drivers and documentation updates can be found at 

support.dell.com

.

• Warranty information
• Terms and Conditions (U.S. only)
• Safety instructions
• Regulatory information
• Ergonomics information
• End User License Agreement

Dell™ Product Information Guide

Summary of Contents for XPS 720





























































































































































































































Reviews:

No comments