Dell S2830dn User Manual Download | Manualshive

Page: 97 / 153

background image

5

Type the IP addresses of the source and target printers in their appropriate ﬁelds.

Note:

If you want to add or remove a target printer, then click

Add Target IP

or

Remove Target IP

.

6

Click

Copy Printer Settings

.

Restoring factory default settings

If you want to keep a list of the current menu settings for reference, then print a menu settings page before
restoring the factory default settings. For more information, see

“Printing a menu settings page” on page 22

If you want a more comprehensive method of restoring the printer factory default settings, then perform the
Wipe All Settings option. For more information, see

volatile memory” on page 87

Warning—Potential Damage:

Restoring factory defaults returns most printer settings to the original factory

default settings. Exceptions include the display language, custom sizes and messages, and network/port
menu settings. All downloads stored in the RAM are deleted. Downloads stored in the ﬂash memory card are
not affected.

From the control panel, navigate to:

>

Settings

>

Settings

>

>

General Settings

>

>

Factory Defaults

>

>

Restore Now

>

Creating a printer control panel PIN

The Panel PIN Protect menu lets you restrict access to the menus from the printer control panel. To restrict
access to the menus, create a Personal Identiﬁcation Number (PIN), and then assign the PIN to each menu.

1

Open a Web browser, and then type the printer IP address in the address ﬁeld.

Notes:

•

View the printer IP address in the TCP/IP section in the Network/Ports menu. The IP address appears
as four sets of numbers separated by periods, such as 123.123.123.123.

•

If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2

Click

Settings

>

Security

>

Panel PIN Protect

.

3

From the Create User PIN or Create Admin PIN sections, enter your PIN.

Note:

Your can enter up to 16 digits for your PIN.

4

Click

Modify

.

5

From any menu in the Administrative Menus, Management, or Function Access sections, select

User PIN

Protected

or

Admin PIN Protected

or

Admin PIN and User PIN Protected

.

Note:

Using an Admin PIN, you can still access a menu assigned with a User PIN.

6

Click

Submit

.

If you try to access a PIN

‑

protected menu from the printer control panel, the printer will require you to enter

the PIN.

Note:

After you enter the last digit of the PIN, make sure to press

on the printer control panel for more

than three seconds.

Managing the printer

97

«
...
95
96
97
98
99
...
»

Summary of Contents for S2830dn


























































































































































Reviews:

No comments

Related manuals for S2830dn

Brand: Oki Pages: 62

Brand: TallyGenicom Pages: 144

Brand: Samsung Pages: 199

Brand: Pantum Pages: 115

SuperScript 610

Brand: NEC Pages: 105

Brand: Oce Pages: 686

LaserPro StellarMark IFII Series

Brand: GCC Technologies Pages: 111

Brand: Monarch Pages: 8

Brand: Lanier Pages: 4

Brand: Oce Pages: 61

Brand: XYZ Printing Pages: 33

Brand: SATO Pages: 2

CHAMPION MSP 450

Brand: TVS electronics Pages: 92

Brand: Bang & Olufsen Pages: 4

Brand: Gestetner Pages: 335

Brand: Canon Pages: 229

image runner 2520

Brand: Canon Pages: 630

imageCLASS D530

Brand: Canon Pages: 76

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands