Dell S2830dn User Manual Download

Page: 58 / 153

Use

Enable DHCP

Off

Specify the DHCP address and parameter assignment.

Note:

On is the factory default setting.

Enable AutoIP

Yes

Specify the Zero Conﬁguration Networking setting.

Note:

Yes is the factory default setting.

Enable FTP/TFTP

Yes

Enable the built-in FTP server, which lets you send ﬁles to the printer using File
Transfer Protocol.

Note:

Yes is the factory default setting.

Enable HTTP Server

Yes

Enable the built-in Web server (Embedded Web Server). When enabled, the
printer can be monitored and managed remotely using a Web browser.

Note:

Yes is the factory default setting.

WINS Server Address

View or change the current WINS server address.

Enable DDNS

Yes

View or change the current DDNS setting.

Note:

Yes is the factory default setting.

Enable mDNS

Yes

View or change the current mDNS setting.

Note:

Yes is the factory default setting.

DNS Server Address

View or change the current DNS server address.

Backup DNS Server Address

View or change the backup DNS server addresses.

Backup DNS Server Address 2

Backup DNS Server Address 3

Enable HTTPS

Yes

View or change the current HTTPS setting.

Note:

Yes is the factory default setting.

IPv6 menu

To access the menu, navigate to any of the following:

•

Network/Ports

Standard Network

Standard Network Setup

IPv6

•

Network/Ports

Network [x]

Network [x] Setup

IPv6

Note:

This menu is available only in network printers or printers connected to print servers.

Use

Enable IPv6

Off

Enable Internet Protocol Version Six (IPv6) in the printer.

IPv6 uses bigger numbers to create IP addresses.

Note:

On is the factory default setting.

These settings can be changed only from the Embedded Web Server.

Understanding the printer menus

Summary of Contents for S2830dn


























































































































































Search results

Summary of Contents for S2830dn

Reviews:

Related manuals for S2830dn

Brands by name

Popular brands

Dell S2830dn, User Manual

Search results

Summary of Contents for S2830dn

Reviews:

Related manuals for S2830dn

Brands by name

Popular brands