Dell S2830dn User Manual Download Page 123

Page: 123 / 153

Action

Yes

Step 6

Remove, and then reinstall the printer software. For more
information, see

“Installing the printer” on page 18

Note:

For more information, visit

www.dell.com/support/printers

Resend the print job.

Do the jobs print?

The problem is
solved.

Contact

technical

support

Printing slows down

Notes:

•

When printing using narrow paper, the printer prints at a reduced speed to prevent damage to the fuser.

•

The printer speed may be reduced when printing for long periods of time, or printing at elevated
temperatures.

•

The printer speed may also be reduced when the printed output resolution is set to 1,200 dpi.

Action

Yes

Place letter

‑

or A4

‑

size paper in the tray, and then resend the print

job.

Does the print speed increase?

The problem is
solved.

Contact

technical

support

Print job takes longer than expected

Action

Yes

Step 1

Change the environmental settings of the printer.

From the control panel, navigate to:

Settings

General Settings

Select

Eco

‑

Mode

Quiet Mode

, and then select

Off

Note:

Disabling Eco-Mode or Quiet Mode may increase the

consumption of energy or supplies, or both.

Did the job print?

The problem is
solved.

Go to step 2.

Step 2

Reduce the font size, the number and complexity of images, and
the number of pages in the print job, and then resend the job

Did the job print?

The problem is
solved.

Go to step 3.

Troubleshooting

123

Summary of Contents for S2830dn


























































































































































Search results

Summary of Contents for S2830dn

Reviews:

Brands by name

Popular brands

Dell S2830dn, User Manual

Search results

Summary of Contents for S2830dn

Reviews:

Brands by name

Popular brands