Dell S2830dn User Manual Download

Page: 137 / 153

Action

Yes

Step 6

Redistribute the toner in the imaging unit.

Remove the toner cartridge, and then the imaging unit.

Firmly shake the imaging unit.

Warning—Potential Damage:

Do not expose the imaging

unit to direct light for more than 10 minutes. Extended
exposure to light may cause print quality problems.

Install the imaging unit, and then the cartridge.

Resend the print job.

Is the print still too light?

Go to step 7.

The problem is
solved.

Step 7

Replace the imaging unit, and then resend the print job.

Is the print still too light?

Contact

technical

support

The problem is
solved.

Skewed print

Action

Yes

Step 1

Move the width and length guides in the tray to the correct
positions for the size of the paper loaded.

Resend the print job.

Is the print still skewed?

Go to step 2.

The problem is
solved.

Step 2

Check if you are printing on a paper that is supported by the
tray.

Resend the print job.

Is the print still skewed?

Contact

technical

support

The problem is
solved.

Troubleshooting

137

Summary of Contents for S2830dn


























































































































































Search results

Summary of Contents for S2830dn

Reviews:

Related manuals for S2830dn

Brands by name

Popular brands

Dell S2830dn, User Manual

Search results

Summary of Contents for S2830dn

Reviews:

Related manuals for S2830dn

Brands by name

Popular brands