Dell S2830dn User Manual Download

Page: 141 / 153

Action

Yes

Step 4

Reinstall the imaging unit.

Remove the toner cartridge, and then the imaging unit.

Warning—Potential Damage:

Do not expose the imaging

unit to direct light for more than 10 minutes. Extended
exposure to light may cause print quality problems.

Install the imaging unit, and then the cartridge.

Resend the print job.

Do streaked vertical lines appear on prints?

Go to step 5.

The problem is
solved.

Step 5

Replace the imaging unit, and then resend the print job.

Do streaked vertical lines appear on prints?

Contact

technical

support

or your Dell

printer dealer.

The problem is
solved.

Horizontal voids appear on prints

Action

Yes

Step 1

Make sure your software program is using a correct ﬁll pattern.

Resend the print job.

Do horizontal voids appear on prints?

Go to step 2.

The problem is
solved.

Step 2

Load the speciﬁed tray or feeder with a recommended type of
paper.

Resend the print job.

Do horizontal voids appear on prints?

Go to step 3.

The problem is
solved.

Troubleshooting

141

Summary of Contents for S2830dn


























































































































































Search results

Summary of Contents for S2830dn

Reviews:

Related manuals for S2830dn

Brands by name

Popular brands

Dell S2830dn, User Manual

Search results

Summary of Contents for S2830dn

Reviews:

Related manuals for S2830dn

Brands by name

Popular brands