Repeating defects appear on prints
Action
Yes
No
Step 1
Measure the distance between the defects.
Check for a distance between the defects that equals:
•
97 mm (3.82 in.)
•
47 mm (1.85 in.)
•
38 mm (1.5 in.)
Is the distance between defects equal to one of the listed
measurements?
Go to step 2.
1
Check if the
distance
between the
defects equal to
80 mm (3.15 in.)
2
Take note of the
distance, and
then contact
Dell printer
dealer.
Step 2
Replace the imaging unit, and then resend the print job.
Do the repeating defects still appear?
Contact
or your Dell
printer dealer.
The problem is
solved.
Print is too dark
Action
Yes
No
Step 1
a
From the Quality menu on the printer control panel, reduce the
toner darkness.
Note:
8 is the factory default setting.
b
Resend the print job.
Is the print still too dark?
Go to step 2.
The problem is
solved.
Troubleshooting
134
