Dell S2830dn User Manual Download

Page: 144 / 153

Embedded Web Server does not open

Action

Yes

Step 1

Turn on the printer.

Open a Web browser, and then type the printer IP address.

Press

Enter

Does the Embedded Web Server open?

The problem is
solved.

Go to step 2.

Step 2

Make sure the printer IP address is correct.

View the printer IP address:

•

From the TCP/IP section in the Network/Ports menu

•

By printing a network setup page or menu settings page,
and then ﬁnding the TCP/IP section

Note:

An IP address appears as four sets of numbers

separated by periods, such as 123.123.123.123.

Open a Web browser, and then type the IP address.

Note:

Depending on the network settings, you may need to

type “

https://

” instead of “

http://

” before the printer IP

address to access the Embedded Web Server.

Press

Enter

Does the Embedded Web Server open?

The problem is
solved.

Go to step 3.

Step 3

Check if the network is working.

Print a network setup page.

Check the ﬁrst section of the network setup page and conﬁrm
that the status is Connected.

Note:

If the status is Not Connected, then the connection

may be intermittent, or the network cable may be defective.
Contact your system support person for a solution, and then
print another network setup page.

Open a Web browser, and then type the printer IP address.

Press

Enter

Does the Embedded Web Server open?

The problem is
solved.

Go to step 4.

Troubleshooting

144

Summary of Contents for S2830dn


























































































































































Search results

Summary of Contents for S2830dn

Reviews:

Related manuals for S2830dn

Brands by name

Popular brands

Dell S2830dn, User Manual

Search results

Summary of Contents for S2830dn

Reviews:

Related manuals for S2830dn

Brands by name

Popular brands