Dell S2830dn User Manual Download

Page: 57 / 153

Reports menu

Use

Print Setup Page

Print a report containing information about the network printer settings, such as the TCP/IP
address.

Network Card menu

Use

View Card Status

Connected

Disconnected

View the connection status of the network card.

View Card Speed

View the speed of an active network card.

Network Address

UAA

LAA

View the network addresses.

Job Timeout

0–255 seconds

Set the amount of time it takes for a network print job to be canceled.

Notes:

•

90 seconds is the factory default setting.

•

A setting value of 0 disables the timeout.

•

If a value of 1–9 is selected, then the setting is saved as 10.

Banner Page

Off

Enable banner pages.

Note:

Off is the factory default setting

TCP/IP menu

Note:

This menu is available only in network printers or printers connected to print servers.

Use

Set Hostname

Set the host name.

Notes:

•

This setting can be changed only from the Embedded Web Server.

•

The host name can be up to 15 characters and can be a US

‑

ASCII or

alphanumeric character, or hyphen.

IP Address

View or change the current TCP/IP address.

Note:

Manually setting the IP address sets the Enable DHCP and Enable Auto

IP settings to Off. It also sets Enable BOOTP and Enable RARP to Off on
systems that support BOOTP and RARP.

Netmask

View or change the current TCP/IP netmask.

Gateway

View or change the current TCP/IP gateway.

Understanding the printer menus

Summary of Contents for S2830dn


























































































































































Search results

Summary of Contents for S2830dn

Reviews:

Related manuals for S2830dn

Brands by name

Popular brands

Dell S2830dn, User Manual

Search results

Summary of Contents for S2830dn

Reviews:

Related manuals for S2830dn

Brands by name

Popular brands