Dell S2830dn User Manual Download

Page: 125 / 153

Incorrect characters print

Action

Yes

Step 1

Make sure the printer is not in Hex Trace mode.

Note:

Ready Hex

appears on the printer display, then turn off

the printer, and then turn it back on to deactivate Hex Trace
mode.

Is the printer in Hex Trace mode?

Deactivate Hex
Trace mode.

Go to step 2.

Step 2

From the printer control panel, select

Standard Network

Network [x]

, and then set SmartSwitch to On.

Resend the print job.

Do incorrect characters print?

Contact

technical

support

The problem is
solved.

Tray linking does not work

Note:

The trays and the multipurpose feeder do not automatically detect the paper size. You must set

the size from the Paper Size/Type menu.

Action

Yes

From the printer control panel, set the paper size and type in
the Paper menu to match the paper loaded in the trays to be
linked.

Note:

The paper size and type must match for trays to be

linked.

Resend the print job.

Do the trays link correctly?

The problem is
solved.

Contact

technical

support

Large jobs do not collate

Action

Yes

Step 1

From the Finishing menu on the printer control panel, set
Collate to (1,2,3) (1,2,3).

Resend the print job.

Did the job print and collate correctly?

The problem is
solved.

Go to step 2.

Troubleshooting

125

Summary of Contents for S2830dn


























































































































































Search results

Summary of Contents for S2830dn

Reviews:

Related manuals for S2830dn

Brands by name

Popular brands

Dell S2830dn, User Manual

Search results

Summary of Contents for S2830dn

Reviews:

Related manuals for S2830dn

Brands by name

Popular brands