User Diagnostics for Windows NIC Driver Management Applications: QLogic QME8242 Mezzanine Card User's Guide
file:///T|/htdocs/NETWORK/QLogic/71922/en/diag_win.htm[9/26/2012 4:26:06 PM]
Back to Contents Page
User Diagnostics for Windows NIC Driver Management
Applications: QLogic QME8242 Mezzanine Card User’s Guide
This section covers the following information for user diagnostics for Windows NIC driver management applications:
Running Windows User Diagnostics
Windows Diagnostic Test Descriptions
Windows Diagnostic Test Messages
NOTE:
The current release does not support external and internal loopback tests. Support is expected in a future
release.
Running Windows User Diagnostics
You can run user diagnostics using either the GUI or the CLI.
NOTE:
Information on installing and starting the GUI version of
QLogic's QConvergeConsole utility
is provided in the
QConvergeConsole User's Guide
. All procedural information for that utility is covered in the online help system.
To run user diagnostics in the GUI:
1. Access the Windows Control Panel, and then open the Device Manager.
2. In the Device Manager, right-click the QLogic 10 Gb Ethernet adapter, and then on the shortcut menu, click
Properties
.
3. On the adapter properties page, click the
Diagnostics
tab.
Figure 1
shows the Diagnostics page.
Figure 1. Diagnostics Tests on Windows
