Dell Precision Workstation 530, User Manual

Page: 69 / 300

Removing and Installing Parts
69
O p e n i n g t h e C o m p u t e r C o v e r
Closing the Computer Cover
1
Check all cable connections, especially those that might have come
loose during your work. Fold cables out of the way so that they do not
obstruct the computer cover.
2
Ensure that no tools or extra parts (including screws) are left inside the
computer.
3
Close the computer cover by pivoting the cover down toward the back
of the chassis and into position. Ensure that the release latch clicks
into place (see the following figure).
NOTE:
As you close the cover, hold the release latch to the left, in its
open position, and then slide the release latch to the right to latch the
cover to the chassis.
padlock ring
cover release latch
security cable slot